Run Ubuntu as the User VM

Prerequisites

This tutorial assumes you have already set up the ACRN Service VM on an Intel NUC Kit. If you have not, refer to the following instructions:

Before you start this tutorial, make sure the KVM tools are installed on the development machine and set IGD Aperture Size to 512 in the BIOS settings (refer to Figure 8). Connect two monitors to your Intel NUC:

$ sudo apt install qemu-kvm libvirt-clients libvirt-daemon-system bridge-utils virt-manager ovmf
../_images/ubuntu-uservm-0.png

Figure 8 Intel Visual BIOS

We installed these KVM tools on Ubuntu 18.04; refer to the table below for our hardware configurations.

Hardware Configurations

Platform (Intel x86)

Product/Kit Name

Hardware | Description

Kaby Lake

NUC7i7DNH

Processor

  • Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz

Graphics

  • UHD Graphics 620

  • Two HDMI 2.0a ports supporting 4K at 60 Hz

System memory

  • 8GiB SO-DIMM DDR4 2400 MHz

Storage capabilities

  • 1TB WDC WD10SPZX-22Z

PC (development machine)

Processor

  • Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz

System memory

  • 2GiB DIMM DDR3 Synchronous 1333 MHz x 4

Storage capabilities

  • 1TB WDC WD10JPLX-00M

Validated Versions

  • Ubuntu version: 18.04

  • ACRN hypervisor tag: v2.2

  • Service VM Kernel version: v2.2

Build the Ubuntu KVM Image

This tutorial uses the Ubuntu 18.04 desktop ISO as the base image.

  1. Download the Ubuntu 18.04 desktop ISO on your development machine:

  2. Install Ubuntu via the virt-manager tool:

    $ sudo virt-manager
    
  3. Verify that you can see the main menu as shown in Figure 9 below.

    ../_images/ubuntu-uservm-1.png

    Figure 9 Virtual Machine Manager

  4. Right-click QEMU/KVM and select New.

    1. Choose Local install media (ISO image or CD-ROM) and then click Forward. A Create a new virtual machine box displays, as shown in Figure 10 below.

      ../_images/ubuntu-uservm-2.png

      Figure 10 Create a New Virtual Machine

    2. Choose Use ISO image and click Browse - Browse Local. Select the ISO that you get from Step 2 above.

    3. Choose the OS type: Linux, Version: Ubuntu 18.04 LTS and then click Forward.

    4. Select Forward if you do not need to make customized CPU settings.

    5. Choose Create a disk image for virtual machine. Set the

      storage to 20 GB or more if necessary and click Forward.

    6. Rename the image if you desire. You must check the customize configuration before install option before you finish all stages.

  5. Verify that you can see the Overview screen as set up, as shown in Figure 11 below:

    ../_images/ubuntu-uservm-3.png

    Figure 11 Debian Setup Overview

  6. Complete the Ubuntu installation. Verify that you have set up the disk partition as follows:

    • /dev/vda1: EFI System Partition

    • /dev/vda2: File System Partition

  7. Upon installation completion, click Restart Now to make sure the Ubuntu OS boots successfully.

  8. The KVM image is created in the /var/lib/libvirt/images folder. Convert the gcow2 format to img as the root user:

    $ cd ~ && mkdir ubuntu_images && cd ubuntu_images
    $ sudo qemu-img convert -f qcow2 -O raw /var/lib/libvirt/images/ubuntu18.04.qcow2 uos.img
    

Launch the Ubuntu Image as the User VM

Modify the launch_win.sh script in order to launch Ubuntu as the User VM.

Note

This tutorial assumes SATA is the default boot drive; replace /dev/sda1 mentioned below with /dev/nvme0n1p1 if you are using an SSD.

  1. Copy the uos.img to your Intel NUC:

    # scp ~/ubuntu_images/uos.img user_name@ip_address:~/uos.img
    
  2. Log in to the ACRN Service VM, and create a launch script from the existing script:

    $ cd ~
    $ cp /usr/share/acrn/samples/nuc/launch_win.sh ./launch_ubuntu.sh
    $ sed -i "s/win10-ltsc.img/uos.img/" launch_ubuntu.sh
    
  3. Assign USB ports to the Ubuntu VM in order to use the mouse and keyboard before the launch:

    $ vim launch_ubuntu.sh
    
    <Add below as the acrn-dm parameter>
    -s 7,xhci,1-2:1-3:1-4:1-5 \
    

    Note

    This will assign all USB ports (2 front and 2 rear) to the User VM. If you want to only assign the USB ports at the front, use this instead:

    -s 7,xhci,1-2:1-3 \
    

    Refer to Device Model Parameters for ACRN for more information.

  4. Launch the Ubuntu VM after logging in to the Service VM:

    $ sudo sh launch_ubuntu.sh
    
  5. View the Ubuntu desktop on the secondary monitor, as shown in Figure 12 below:

    ../_images/ubuntu-uservm-4.png

    Figure 12 The Ubuntu desktop on the secondary monitor

Enable the Ubuntu Console Instead of the User Interface

After the Ubuntu VM reboots, follow the steps below to enable the Ubuntu VM console so you can make command-line entries directly from it.

  1. Log in to the Ubuntu user interface and launch Terminal from the Application list.

  2. Add console=ttyS0,115200 to the grub file on the terminal:

    $ sudo vim /etc/default/grub
    <Add console=ttyS0,115200>
    GRUB_CMDLINE_LINUX="console=ttyS0,115200"
    $ sudo update-grub
    $ sudo poweroff
    
  3. Modify the launch script to enable virtio-console for the Ubuntu VM:

    $ vim ~/launch_ubuntu.sh
    <add below to the acrn-dm command line>
    -s 9,virtio-console,@stdio:stdio_port \
    
  4. Log in to the Service VM and launch Ubuntu. Verify that you see the console output shown in Figure 13 below:

    ../_images/ubuntu-uservm-5.png

    Figure 13 Ubuntu VM console output