Run Debian as the User VM

Prerequisites

This tutorial assumes you have already set up the ACRN Service VM on an Intel NUC Kit. If you have not, refer to the following instructions:

We are using Intel Kaby Lake NUC (NUC7i7DNHE) and Debian 10 as the User VM in this tutorial.

Before you start this tutorial, make sure the KVM tools are installed on the development machine and set IGD Aperture Size to 512 in the BIOS settings (refer to Figure 57). Connect two monitors to your NUC:

$ sudo apt install qemu-kvm libvirt-clients libvirt-daemon-system bridge-utils virt-manager ovmf
../_images/debian-uservm-0.png

Figure 57 Intel Visual BIOS

We installed these KVM tools on Ubuntu 18.04; refer to the table below for our hardware configurations.

Hardware Configurations

Platform (Intel x86) Product/Kit Name Hardware | Description
Kaby Lake NUC7i7DNH Processor
  • Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
Graphics
  • UHD Graphics 620
  • Two HDMI 2.0a ports supporting 4K at 60 Hz
System memory
  • 8GiB SODIMM DDR4 2400 MHz
Storage capabilities
  • 1TB WDC WD10SPZX-22Z
PC (development machine)   Processor
  • Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
System memory
  • 2GiB DIMM DDR3 Synchronous 1333 MHz x 4
Storage capabilities
  • 1TB WDC WD10JPLX-00M

Validated Versions

  • Clear Linux version: 30920
  • ACRN hypervisor tag: acrn-2019w36.2-140000p
  • Service VM Kernel version: 4.19.68-84.iot-lts2018-sos

Build the Debian KVM Image

This tutorial describes how to build a Debian 10 KVM image. The next few steps will detail how to use the Debian CD-ROM (ISO) image to install Debian 10 onto a virtual disk.

  1. Download the Debian ISO on your development machine:

    $ mkdir ~/debian10 && cd ~/debian10
    $ wget https://cdimage.debian.org/debian-cd/current/amd64/iso-cd/debian-10.0.0-amd64-netinst.iso
    
  2. Install the Debian ISO via the virt-manager tool:

    $ sudo virt-manager
    
  3. Verify that you can see the main menu as shown in Figure 58 below.

    ../_images/debian-uservm-1.png

    Figure 58 Virtual Machine Manager

  4. Right-click QEMU/KVM and select New.

    1. Choose Local install media (ISO image or CDROM) and then click Forward. A Create a new virtual machine box displays, as shown in Figure 59 below.

      ../_images/debian-uservm-2.png

      Figure 59 Create a New Virtual Machine

    1. Choose Use ISO image and click Browse - Browse Local. Select the ISO which you get from Step 1 above.
    2. Choose the OS type: Linux, Version: Debian Stretch and then click Forward.
    3. Select Forward if you do not need to make customized CPU settings.
    4. Choose Create a disk image for virtual machine. Set the storage to 20 GB or more if necessary and click Forward.
    5. Rename the image if you desire. You must check the customize configuration before install option before you finish all stages.
  5. Verify that you can see the Overview screen as set up, as shown in Figure 60 below:

    ../_images/debian-uservm-3.png

    Figure 60 Debian Setup Overview

  6. Complete the Debian installation. Verify that you have set up a vda disk partition, as shown in Figure 61 below:

    ../_images/debian-uservm-4.png

    Figure 61 Virtual Disk (vda) partition

  7. Upon installation completion, the KVM image is created in the /var/lib/libvirt/images folder. Convert the gcow2 format to img as the root user:

    $ cd ~/debian10
    $ qemu-img convert -f qcow2 -O raw /var/lib/libvirt/images/debian10.qcow2 debian10.img
    

Launch the Debian Image as the User VM

Re-use and modify the launch_win.sh script in order to launch the new Debian 10 User VM.

Note

This tutorial assumes SATA is the default boot drive; replace “/dev/sda1” mentioned below with “/dev/nvme0n1p1” if you are using an NVMe drive.

  1. Copy the debian.img to your NUC:

    # scp ~/debian10/debian10.img user_name@ip_address:~/debian10.img
    
  2. Log in to the ACRN Service VM, and create a launch script from the existing script:

    $ cd ~
    $ cp /usr/share/acrn/samples/nuc/launch_win.sh ./launch_debian.sh
    $ sed -i "s/win10-ltsc.img/debian10.img/" launch_debian.sh
    
  3. Assign USB ports to the Debian VM in order to use the mouse and keyboard before the launch:

    $ vim launch_debian.sh
    
    <Add below as the acrn-dm parameter>
    -s 7,xhci,1-2:1-3:1-4:1-5 \
    

    Note

    This will assign all USB ports (2 front and 2 rear) to the User VM. If you want to only assign the USB ports at the front, use “-s 7,xhci,1-2:1-3 ” instead. Refer to Device Model Parameters for ACRN for more information.

  4. Modify acrn.conf and reboot the Service VM to assign the Pipe A monitor to the Debian VM and the Pipe B monitor to the Service VM:

    $ sudo mount /dev/sda1 /mnt
    $ sudo sed -i "s/0x01010F/0x010101/" /mnt/loader/entries/acrn.conf
    $ sudo sed -i "s/0x011111110000/0x011100001111/" /mnt/loader/entries/acrn.conf
    $ sed -i 3"s/$/ i915.enable_conformance_check=0/" /mnt/loader/entries/acrn.conf
    $ sudo sync && sudo umount /mnt && reboot
    
  5. Copy grubx64.efi to bootx64.efi:

    $ sudo losetup -f -P --show ~/debian10.img
    $ sudo mount /dev/loop0p1 /mnt
    $ sudo mkdir -p /mnt/EFI/boot
    $ sudo cp /mnt/EFI/debian/grubx64.efi /mnt/EFI/boot/bootx64.efi
    $ sync && sudo umount /mnt
    
  6. Launch the Debian VM after logging in to the Service VM:

    $ sudo ./launch_debian.sh
    
  7. View the Debian desktop on the secondary monitor, as shown in Figure 63 below:

    ../_images/debian-uservm-5.png
    ../_images/debian-uservm-6.png

    Figure 63 The Debian desktop appears on the secondary monitor (bottom image)

Enable the ttyS0 Console on the Debian VM

After the Debian VM reboots, follow the steps below to enable the ttyS0 console so you can make command-line entries directly from it.

  1. Log in to the Debian user interface and launch Terminal from the Application list.

  2. Add “console=ttyS0,115200” to the grub file on the terminal:

    $ sudo vim /etc/default/grub
    <Add console=ttyS0,115200>
    GRUB_CMDLINE_LINUX="console=ttyS0,115200"
    $ sudo update-grub
    
  3. Add virtio_console to /etc/initramfs-tools/modules. Power OFF the Debian VM after initramfs is updated:

    $ sudo echo "virtio_console" >> /etc/initramfs-tools/modules
    $ sudo update-initramfs -u
    $ sudo poweroff
    
  4. Log in to the Service VM and the modify the launch script to add the virtio-console parameter to the Device Model for the Debian VM:

    $ vim ~/launch_debian.sh
    <add below to the acrn-dm command line>
    -s 9,virtio-console,@stdio:stdio_port \
    
  5. Launch Debian using the modified script. Verify that you see the console output shown in Figure 64 below:

    ../_images/debian-uservm-7.png

    Figure 64 Debian VM console output