Getting Started Guide for ACRN Industry Scenario

Verified version

  • Clear Linux version: 33050
  • ACRN-hypervisor tag: v1.6.1 (acrn-2020w18.4-140000p)
  • ACRN-Kernel (Service VM kernel): 4.19.120-108.iot-lts2018-sos

Prerequisites

The example below is based on the Intel Whiskey Lake NUC platform with two disks, an NVMe disk for the Clear Linux-based Service VM and a SATA disk for the RTVM.

  • Intel Whiskey Lake (aka WHL) NUC platform with two disks inside (refer to the tables for detailed information).
  • com1 is the serial port on WHL NUC. If you are still using the KBL NUC and trying to enable the serial port on it, navigate to the troubleshooting section that discusses how to prepare the cable.
  • Follow the steps below to install Clear Linux OS (ver: 33050) onto the NVMe disk of the WHL NUC.
  1. Create a bootable USB drive on Linux*:

    1. Download the Clear Linux OS Server image.

    2. Plug in the USB drive.

    3. Use the lsblk command line to identify the USB drive:

      $ lsblk | grep sd*
      sda         8:0    0 931.5G  0 disk
      ├─sda1      8:1    0   512M  0 part /boot/efi
      ├─sda2      8:2    0 930.1G  0 part /
      └─sda3      8:3    0   977M  0 part [SWAP]
      sdc         8:32   1  57.3G  0 disk
      └─sdc1      8:33   1  57.3G  0 part
      
    4. Unmount all the /dev/sdc partitions and burn the image onto the USB drive:

      $ umount /dev/sdc* 2>/dev/null
      $ sudo dd if=./clear-33050-live-server.iso of=/dev/sdc oflag=sync status=progress bs=4M
      
  2. Plug in the USB drive to the WHL NUC and boot from USB.

  3. Launch the Clear Linux OS installer boot menu.

  4. With Clear Linux OS highlighted, select Enter.

  5. Log in with your root account and new password.

  6. Run the installer using the following command:

    # clr-installer
    
  7. From the Main menu, select Configure Installation Media and set Destructive Installation to the NVMe disk.

  8. Select Manage User and choose Add New User.

  9. Select Telemetry to set Tab to highlight your choice.

  10. Press A to show the Advanced options.

  11. Select Select additional bundles and add bundles for network-basic, and user-basic.

  12. Select Automatic OS Updates and choose No [Disable].

  13. Select Install.

  14. Select Confirm Install in the Confirm Installation window to start the installation.

Note

Refer to these step-by-step instructions from the Clear Linux OS installation guide.

Hardware Setup

Table 2 Hardware Setup
Platform (Intel x86) Product/kit name Hardware Descriptions
Whiskey Lake WHL-IPC-I7 Processor
  • Intel® Core™ i7-8565U CPU @ 1.80GHz
Graphics
  • UHD Graphics 620
  • ONE HDMI* 1.4a ports supporting 4K at 60 Hz
System memory
  • 8GiB SODIMM DDR4 2400 MHz [1]
Storage capabilities
  • SATA: 128G KINGSTON RBUSNS8
  • NVMe: 256G Intel Corporation SSD Pro 7600p/760p/E 6100p
[1]The maximum supported memory size for ACRN is 16GB. If you are using 32GB memory, follow the How do I configure ACRN’s memory size? instructions to make a customized ACRN hypervisor that can support 32GB memory. For more detailed information about how to build ACRN from the source code, refer to this guide.

Set up the ACRN Hypervisor for industry scenario

The ACRN industry scenario environment can be set up in several ways. The two listed below are recommended:

Use the pre-installed industry ACRN hypervisor

Note

Skip this section if you choose Using the ACRN industry out-of-the-box image.

  1. Boot Clear Linux from NVMe disk.

  2. Log in and download ACRN quick setup script:

    $ wget https://raw.githubusercontent.com/projectacrn/acrn-hypervisor/master/doc/getting-started/acrn_quick_setup.sh
    $ sudo chmod +x acrn_quick_setup.sh
    
  3. Run the script to set up Service VM:

    $ sudo ./acrn_quick_setup.sh -s 33050 -d -e /dev/nvme0n1p1 -i
    

    Note

    -i option means the industry scenario efi image will be used, e.g. acrn.nuc7i7dnb.industry.efi. For the detailed usage of the acrn_quick_setup.sh script, refer to the quick setup ACRN guide or simply type ./acrn_quick_setup.sh -h.

  4. Use efibootmgr -v command to check the ACRN boot order:

    BootCurrent: 0005
    Timeout: 1 seconds
    BootOrder: 0000,0003,0005,0001,0004
    Boot0000* ACRN  HD(1,GPT,cb72266b-c83d-4c56-99e3-3e7d2f4bc175,0x800,0x47000)/File(\EFI\acrn\acrn.efi)u.a.r.t.=.d.i.s.a.b.l.e.d. .
    Boot0001* UEFI OS       HD(1,GPT,335d53f0-50c1-4b0a-b58e-3393dc0389a4,0x800,0x47000)/File(\EFI\BOOT\BOOTX64.EFI)..BO
    Boot0003* Linux bootloader      HD(3,GPT,af681d62-3a96-43fb-92fc-e98e850f867f,0xc1800,0x1dc31800)/File(\EFI\org.clearlinux\bootloaderx64.efi)
    Boot0004* Hard Drive    BBS(HD,,0x0)..GO..NO........o.K.I.N.G.S.T.O.N. .R.B.U.S.N.S.8.1.8.0.S.3.1.2.8.G.J...................A..........................>..Gd-.;.A..MQ..L.0.5.2.0.B.6.6.7.2.8.F.F.3.D.1.0. . . . .......BO..NO........m.F.O.R.E.S.E.E. .2.5.6.G.B. .S.S.D...................A......................................0..Gd-.;.A..MQ..L.J.2.7.1.0.0.R.0.0.0.9.6.9.......BO
    Boot0005* UEFI OS       HD(1,GPT,cb72266b-c83d-4c56-99e3-3e7d2f4bc175,0x800,0x47000)/File(\EFI\BOOT\BOOTX64.EFI)..BO
    

    Note

    Ensure that ACRN is first in the boot order, or you may use the efibootmgr -o 1 command to move it to the first position. If you need to enable the serial port, run the following command before rebooting:

    efibootmgr -c -l '\EFI\acrn\acrn.efi' -d /dev/nvme0n1 -p 1 -L ACRN -u "uart=port@0x3f8 "

    Note the extra space at the end of the EFI command-line options string. This is a workaround for a current efi-stub bootloader name issue. It ensures that the end of the string is properly detected.

  5. Reboot WHL NUC.

  6. Use the dmesg command to ensure that the Service VM boots:

    $ sudo dmesg | grep ACRN
    [    0.000000] Hypervisor detected: ACRN
    [    1.252840] ACRNTrace: Initialized acrn trace module with 4 cpu
    [    1.253291] ACRN HVLog: Failed to init last hvlog devs, errno -19
    [    1.253292] ACRN HVLog: Initialized hvlog module with 4
    

Note

If you want to log in to the Service VM with root privileges, use sudo passwd to create a root user so that you can log in as root on the next reboot.

Use the ACRN industry out-of-the-box image

Note

If you are following the section above to set up the Service VM, jump to the next section.

  1. Boot Clear Linux from SATA disk.

  2. Download the Service VM industry image:

    # wget https://github.com/projectacrn/acrn-hypervisor/releases/download/v1.6.1/sos-industry-33050.img.xz
    

    Note

    You may also follow Generate a Service VM image to build the image by yourself.

  3. Decompress the .xz image:

    # xz -d sos-industry-33050.img.xz
    
  4. Burn the Service VM image onto the NVMe disk:

    # dd if=sos-industry-33050.img of=/dev/nvme0n1 bs=4M oflag=sync status=progress iflag=fullblock seek=0 conv=notrunc
    
  5. Configure the EFI firmware to boot the ACRN hypervisor by default:

    # efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/nvme0n1 -p 1 -L "ACRN" -u "uart=disabled "
    

    Or use the following command to enable the serial port:

    # efibootmgr -c -l "\EFI\acrn\acrn.efi" -d /dev/nvme0n1 -p 1 -L "ACRN" -u "uart=port@0x3f8 "
    

    Note

    Note the extra space at the end of the EFI command-line options strings above. This is a workaround for a current efi-stub bootloader name issue. It ensures that the end of the string is properly detected.

  6. Reboot the test machine. After the Clear Linux OS boots, log in as root for the first time.

Install and launch the Preempt-RT VM

In this section, we will use Virtio-blk to launch the Preempt-RT VM. If you need better performance, follow Build ACRN in Docker to build the ACRN kernel for the Service VM, and then passthrough the SATA disk to launch the Preempt-RT VM.

  1. Log in to the Service VM with root privileges.

  2. Download the Preempt-RT VM image:

    # wget https://github.com/projectacrn/acrn-hypervisor/releases/download/v1.6.1/preempt-rt-33050.img.xz
    

    Note

    You may also follow Generate a User VM Preempt-RT image to build the Preempt-RT VM image by yourself.

  3. Decompress the xz image:

    # xz -d preempt-rt-33050.img.xz
    
  4. Burn the Preempt-RT VM image onto the SATA disk:

    # dd if=preempt-rt-33050.img of=/dev/sda bs=4M oflag=sync status=progress iflag=fullblock seek=0 conv=notrunc
    
  5. Modify the script to use the virtio device.

    # NVME pass-through
    #echo ${passthru_vpid["nvme"]} > /sys/bus/pci/drivers/pci-stub/new_id
    #echo ${passthru_bdf["nvme"]} > /sys/bus/pci/devices/${passthru_bdf["nvme"]}/driver/unbind
    #echo ${passthru_bdf["nvme"]} > /sys/bus/pci/drivers/pci-stub/bind
    
    /usr/bin/acrn-dm -A -m $mem_size -s 0:0,hostbridge \
       --lapic_pt \
       --rtvm \
       --virtio_poll 1000000 \
       -U 495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 \
       -s 2,virtio-blk,/dev/sda \
       -s 3,virtio-console,@stdio:stdio_port \
       $pm_channel $pm_by_vuart \
       --ovmf /usr/share/acrn/bios/OVMF.fd \
       hard_rtvm
    
    }
    
  6. Upon deployment completion, launch the RTVM directly onto your WHL NUC:

    # /usr/share/acrn/samples/nuc/launch_hard_rt_vm.sh
    

RT Performance Test

Cyclictest introduction

The cyclictest is most commonly used for benchmarking RT systems. It is one of the most frequently used tools for evaluating the relative performance of real-time systems. Cyclictest accurately and repeatedly measures the difference between a thread’s intended wake-up time and the time at which it actually wakes up in order to provide statistics about the system’s latencies. It can measure latencies in real-time systems that are caused by hardware, firmware, and the operating system. The cyclictest is currently maintained by Linux Foundation and is part of the test suite rt-tests.

Pre-Configurations

Firmware update on the NUC

If you need to update to the latest UEFI firmware for the NUC hardware. Follow these BIOS Update Instructions for downloading and flashing an updated BIOS for the NUC.

Configure RDT

In addition to setting the CAT configuration via HV commands, we allow developers to add CAT configurations to the VM config and configure automatically at the time of RTVM creation. Refer to Enable RDT Configuration for details on RDT configuration and RDT Allocation Feature Supported by Hypervisor for details on RDT high-level design.

Set up the core allocation for the RTVM

In our recommended configuration, two cores are allocated to the RTVM: core 0 for housekeeping and core 1 for RT tasks. In order to achieve this, follow the below steps to allocate all housekeeping tasks to core 0:

  1. Launch RTVM:

    # /usr/share/acrn/samples/nuc/launch_hard_rt_vm.sh
    
  2. Log in to RTVM as root and run the script as below:

    #!/bin/bash
    # Copyright (C) 2019 Intel Corporation.
    # SPDX-License-Identifier: BSD-3-Clause
    # Move all IRQs to core 0.
    for i in `cat /proc/interrupts | grep '^ *[0-9]*[0-9]:' | awk {'print $1'} | sed 's/:$//' `;
    do
        echo setting $i to affine for core zero
        echo 1 > /proc/irq/$i/smp_affinity
    done
    
    # Move all rcu tasks to core 0.
    for i in `pgrep rcu`; do taskset -pc 0 $i; done
    
    # Change realtime attribute of all rcu tasks to SCHED_OTHER and priority 0
    for i in `pgrep rcu`; do chrt -v -o -p 0 $i; done
    
    # Change realtime attribute of all tasks on core 1 to SCHED_OTHER and priority 0
    for i in `pgrep /1`; do chrt -v -o -p 0 $i; done
    
    # Change realtime attribute of all tasks to SCHED_OTHER and priority 0
    for i in `ps -A -o pid`; do chrt -v -o -p 0 $i; done
    
    echo disabling timer migration
    echo 0 > /proc/sys/kernel/timer_migration
    

    Note

    You can ignore the error messages during the script running.

Run cyclictest

  1. Refer to the troubleshooting section below that discusses how to enable the network connection for RTVM.

  2. Launch RTVM and log in as root.

  3. Install the cyclictest tool:

    # swupd bundle-add dev-utils --skip-diskspace-check
    
  4. Use the following command to start cyclictest:

    # cyclictest -a 1 -p 80 -m -N -D 1h -q -H 30000 --histfile=test.log
    

    Parameter descriptions:

    -a 1:to bind the RT task to core 1
    -p 80:to set the priority of the highest prio thread
    -m:lock current and future memory allocations
    -N:print results in ns instead of us (default us)
    -D 1h:to run for 1 hour, you can change it to other values
    -q:quiet mode; print a summary only on exit
    -H 30000 –histfile=test.log:
     dump the latency histogram to a local file

Launch additional User VMs

With the CPU sharing feature enabled, the Industry scenario supports a maximum of 6 post-launched VMs, including 1 post Real-Time VM (Preempt-RT, VxWorks*, Xenomai*) and 5 post standard VMs (Clear Linux*, Android*, Windows*).

You should follow the steps below to launch those post standard VMs.

Prepare the launch scripts

  1. Install dependencies on your workspace and get the acrn-hypervisor source code:

    $ git clone https://github.com/projectacrn/acrn-hypervisor
    
  2. Generate launch scripts by acrn-configuration-tool:

    $ cd acrn-hypervisor
    $ export board_file=$PWD/misc/acrn-config/xmls/board-xmls/whl-ipc-i5.xml
    $ export scenario_file=$PWD/misc/acrn-config/xmls/config-xmls/whl-ipc-i5/industry.xml
    $ export launch_file=$PWD/misc/acrn-config/xmls/config-xmls/whl-ipc-i5/industry_launch_6uos.xml
    $ python misc/acrn-config/launch_config/launch_cfg_gen.py --board $board_file --scenario $scenario_file --launch $launch_file --uosid 0
    
  3. Launch scripts will be generated in misc/acrn-config/xmls/config-xmls/whl-ipc-i5/output directory.

    The launch scripts are:

    For Windows: For Preempt-RT: For other VMs:
    launch_uos_id1.sh launch_uos_id2.sh
    launch_uos_id3.sh
    launch_uos_id4.sh
    launch_uos_id5.sh
    launch_uos_id6.sh
  4. Copy those files to your WHL board:

    $ scp -r misc/acrn-config/xmls/config-xmls/whl-ipc-i5/output <board address>:~/
    

Launch Windows VM

  1. Follow this guide to prepare the Windows image file, update Service VM kernel and then reboot with new acrngt.conf.

  2. Modify launch_uos_id1.sh script as following and then launch Windows VM as one of the post-launched standard VMs:

    acrn-dm -A -m $mem_size -s 0:0,hostbridge -U d2795438-25d6-11e8-864e-cb7a18b34643 \
       --windows \
       $logger_setting \
       -s 5,virtio-blk,<your win img directory>/win10-ltsc.img \
       -s 6,virtio-net,tap_WaaG \
       -s 2,passthru,0/2/0,gpu  \
       --ovmf /usr/share/acrn/bios/OVMF.fd \
       -s 1:0,lpc \
       -l com1,stdio \
       $boot_audio_option \
       $vm_name
    }
    

    Note

    -s 2,passthru,0/2/0,gpu means Windows VM will be launched as GVT-d mode, which is passthrough VGA controller to the Windows. You may find more details in Launch Windows as the Guest VM on ACRN.

Launch other standard VMs

If you want to launch other VMs such as Clearlinux* or Android*, then you should use one of these scripts: launch_uos_id3.sh, launch_uos_id4.sh, launch_uos_id5.sh, launch_uos_id6.sh.

Here is an example to launch a Clear Linux VM:

  1. Download Clear Linux KVM image:

    $ cd ~/output && curl https://cdn.download.clearlinux.org/releases/33050/clear/clear-33050-kvm.img.xz -o clearlinux.img.xz
    $ unxz clearlinux.img.xz
    
  2. Modify launch_uos_id3.sh script to launch Clear Linux VM:

    #echo ${passthru_vpid["gpu"]} > /sys/bus/pci/drivers/pci-stub/new_id
    #echo ${passthru_bdf["gpu"]} > /sys/bus/pci/devices/${passthru_bdf["gpu"]}/driver/unbind
    #echo ${passthru_bdf["gpu"]} > /sys/bus/pci/drivers/pci-stub/bind
    echo 100 > /sys/bus/usb/drivers/usb-storage/module/parameters/delay_use
    mem_size=200M
    #interrupt storm monitor for pass-through devices, params order:
    #threshold/s,probe-period(s),intr-inject-delay-time(ms),delay-duration(ms)
    intr_storm_monitor="--intr_monitor 10000,10,1,100"
    
    #logger_setting, format: logger_name,level; like following
    logger_setting="--logger_setting console,level=4;kmsg,level=3;disk,level=5"
    
    acrn-dm -A -m $mem_size -s 0:0,hostbridge -U 615db82a-e189-4b4f-8dbb-d321343e4ab3 \
       --mac_seed $mac_seed \
       $logger_setting \
       -s 2,virtio-blk,./clearlinux.img \
       -s 3,virtio-console,@stdio:stdio_port \
       --ovmf /usr/share/acrn/bios/OVMF.fd \
       -s 8,virtio-hyper_dmabuf \
       $intr_storm_monitor \
       $vm_name
    }
    launch_clearlinux 3
    

    Note

    Remove -s 2,passthru,0/2/0,gpu parameter before you launch Clear Linux VM because the VGA controller is already passthrough to the Windows VM and it’s no longer visible for other VMs.

    Before launching VMs, check available free memory using free -m and update the mem_size value.

    If you will run multiple Clear Linux User VMs, also make sure the VM names don’t conflict with others or you must change the number in the last line of the script, such as launch_clearlinux 3.

Troubleshooting

Use serial port on KBL NUC

You can enable the serial console on the KBL NUC (NUC7i7DNH). The KBL NUC has a serial port header you can expose with a serial DB9 header cable. You can build this cable yourself; refer to the KBL NUC product specification as shown below:

../_images/KBL-serial-port-header.png

Figure 21 KBL serial port header details

Or you can purchase such a cable.

You’ll also need an RS232 DB9 female to USB cable, or an RS232 DB9 female/female (NULL modem) cross-over cable to connect to your host system.

Note that If you want to use the RS232 DB9 female/female cable, choose the cross-over type rather than straight-through type.

EFI image doesn’t exist

You might see the error message if you are running the acrn_quick_setup.sh script on an older Clear Linux OS ( < 31470 ):

/usr/lib/acrn/acrn.wl10.industry.efi doesn't exist.
Use one of these efi images from /usr/lib/acrn.
------
/usr/lib/acrn/acrn.nuc7i7dnb.industry.efi
------
Copy the efi image to /usr/lib/acrn/acrn.wl10.industry.efi, then run the script again.

To fix it, just rename the existing efi image to /usr/lib/acrn/acrn.wl10.industry.efi and then run the script again:

$ sudo cp /usr/lib/acrn/acrn.nuc7i7dnb.industry.efi /usr/lib/acrn/acrn.wl10.industry.efi
$ sudo ./acrn_quick_setup.sh -s <target OS version> -d -e <target EFI partition> -i

Enabling the network on RTVM

If you need to access the internet, you must add the following command line to the launch_hard_rt_vm.sh script before launch it:

/usr/bin/acrn-dm -A -m $mem_size -s 0:0,hostbridge \
   --lapic_pt \
   --rtvm \
   --virtio_poll 1000000 \
   -U 495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 \
   -s 2,passthru,02/0/0 \
   -s 3,virtio-console,@stdio:stdio_port \
   -s 8,virtio-net,tap0 \
   $pm_channel $pm_by_vuart \
   --ovmf /usr/share/acrn/bios/OVMF.fd \
   hard_rtvm
}

Passthrough a hard disk to the RTVM

  1. Use the lspci command to ensure that the correct SATA device IDs will be used for the passthrough before launching the script:

    # lspci -nn | grep -i sata
    00:17.0 SATA controller [0106]: Intel Corporation Cannon Point-LP SATA Controller [AHCI Mode] [8086:9dd3] (rev 30)
    
  2. Modify the script to use the correct SATA device IDs and bus number:

    # vim /usr/share/acrn/samples/nuc/launch_hard_rt_vm.sh
    
    passthru_vpid=(
    ["eth"]="8086 156f"
    ["sata"]="8086 9dd3"
    ["nvme"]="8086 f1a6"
    )
    passthru_bdf=(
    ["eth"]="0000:00:1f.6"
    ["sata"]="0000:00:17.0"
    ["nvme"]="0000:02:00.0"
    )
    
    # SATA pass-through
    echo ${passthru_vpid["sata"]} > /sys/bus/pci/drivers/pci-stub/new_id
    echo ${passthru_bdf["sata"]} > /sys/bus/pci/devices/${passthru_bdf["sata"]}/driver/unbind
    echo ${passthru_bdf["sata"]} > /sys/bus/pci/drivers/pci-stub/bind
    
    # NVME pass-through
    #echo ${passthru_vpid["nvme"]} > /sys/bus/pci/drivers/pci-stub/new_id
    #echo ${passthru_bdf["nvme"]} > /sys/bus/pci/devices/${passthru_bdf["nvme"]}/driver/unbind
    #echo ${passthru_bdf["nvme"]} > /sys/bus/pci/drivers/pci-stub/bind
    
       --lapic_pt \
       --rtvm \
       --virtio_poll 1000000 \
       -U 495ae2e5-2603-4d64-af76-d4bc5a8ec0e5 \
       -s 2,passthru,00/17/0 \
       -s 3,virtio-console,@stdio:stdio_port \
       -s 8,virtio-net,tap0 \
       $pm_channel $pm_by_vuart \
       --ovmf /usr/share/acrn/bios/OVMF.fd \
       hard_rtvm
    
     }
    
  3. Upon deployment completion, launch the RTVM directly onto your WHL NUC:

    # /usr/share/acrn/samples/nuc/launch_hard_rt_vm.sh