AHCI Virtualization in Device Model

AHCI (Advanced Host Controller Interface) is a hardware mechanism that allows software to communicate with Serial ATA devices. AHCI HBA (host bus adapters) is a PCI class device that acts as a data movement engine between system memory and Serial ATA devices. The ACPI HBA in ACRN supports both ATA and ATAPI devices. The architecture is shown in the below diagram.


HBA is registered to the PCI system with device id 0x2821 and vendor id 0x8086. Its memory registers are mapped in BAR 5. It only supports 6 ports (refer to ICH8 AHCI). AHCI driver in the Guest OS can access HBA in DM through the PCI BAR. And HBA can inject MSI interrupts through the PCI framework.

When the application in the Guest OS reads data from /dev/sda, the request will send through the AHCI driver and then the PCI driver. The Guest VM will trap to hypervisor, and hypervisor dispatch the request to DM. According to the offset in the BAR, the request will dispatch to port control handler. Then the request is parse to a block I/O request which can be processed by Block backend model.


*-s <slot>,ahci,<type:><filepath>*

Type:  ‘hd’ and ‘cd’ are available.

Filepath:  the path for the backend file, could be a partition or a regular file.


SOS: -s 20,ahci,hd:/dev/mmcblk0p1

UOS: /dev/sda