ACRN Shell Commands

The ACRN hypervisor shell supports the following commands:

Command (and parameters) Description
help Display information about supported hypervisor shell commands
version Display the HV version information
vm_list List all VMs, displaying the VM UUID, ID, name, and state (“Started”=running)
vcpu_list List all vCPUs in all VMs
vcpu_dumpreg <vm_id> <vcpu_id> Dump registers for a specific vCPU
dumpmem <hva> <length> Dump host memory, starting at a given address, and for a given length (in bytes)
vm_console <vm_id> Switch to the VM’s console. Use Ctrl+Spacebar to return to the ACRN shell console
int List interrupt information per CPU
pt Show pass-through device information
vioapic <vm_id> Show virtual IOAPIC (vIOAPIC) information for a specific VM
dump_ioapic Show native IOAPIC information
loglevel <console_loglevel> <mem_loglevel> <npk_loglevel>
  • If no parameters are given, the command will return the level of logging for the console, memory and npk
  • Give (up to) three parameters between 0 (none) and 6 (verbose) to set the loglevel for the console, memory, and npk (in that order). If less than three parameters are given, the loglevels for the remaining areas will not be changed
cpuid <leaf> [subleaf] Display the CPUID leaf [subleaf], in hexadecimal
rdmsr [-p<pcpu_id>] <msr_index> Read the Model-Specific Register (MSR) at index msr_index (in hexadecimal) for CPU ID pcpu_id
wrmsr [-p<pcpu_id>] <msr_index> <value> Write value (in hexadecimal) to the Model-Specific Register (MSR) at index msr_index (in hexadecimal) for CPU ID pcpu_id

Command examples

The following sections provide further details and examples for some of these commands.


vm_list provides the name of each virtual machine and its corresponding ID and state.


Figure 269 vm_list information


vcpu_list provides information about virtual CPUs (vCPU), including the VM ID, PCPU ID, VCPU ID, VCPU ROLE (primary or secondary), and VCPU STATE (init, paused, running, zombie or unknown).


Figure 270 vcpu_list information


vcpu_dumpreg vmid cpuid provides vCPU related information such as registers values, etc.

In the following example, we dump vCPU0 RIP register value and get into the SOS to search for the currently running function, using these commands:

cat /proc/kallsyms | grep RIP_value

As you can see, vCPU0 is running in function acpi_idle_do_entry.


Figure 271 vcpu_dumpreg information


Figure 272 system map information


dumpmem mem_address provides the specified memory target data such as the physical CPU (pCPU) number, etc.

In this example, we know the pCPU active bitmap and physical CPU number physical memory address through build/hypervisor/ (Note that the path for depends on how we build the hypervisor.)

Then we can dump the memory address of the pCPU active bitmap and CPU number, we will know that pCPU active bitmap is 0x000000000000000f and pCPU number is 0x0000000000000004.


Figure 273 dumpmem information


Figure 274 acrn map information


The vm_console command switches the ACRN’s console to become the VM’s console. Use a Ctrl-Spacebar to return to the ACRN shell console.


vioapic <vm_id> shows the virtual IOAPIC information for a specific VM. In the following figure, we show the virtual IOPIC information for VM1:


Figure 275 vioapic information


dump_ioapic provides IOAPIC information and we can get IRQ number, IRQ vector number, etc.


Figure 276 dump_ioapic information


pt provides pass-through detailed information, such as the virtual machine number, interrupt type, interrupt request, interrupt vector, trigger mode, etc.


Figure 277 pt information


int provides interrupt information on all CPUs and their corresponding interrupt vector.


Figure 278 int information


cpuid <leaf> [subleaf] provides the CPUID leaf [subleaf] in hexadecimal.


Figure 279 cpuid information


We can read model specific register (MSR) to get register values through rdmsr [-p<pcpu_id>] <msr_index>.

In the following example, we can get IA32_APIC_BASE value of pCPU 0 through the command:

rdmsr -p0 1b

and see that 1B (Hexadecimal) is the IA32_APIC_BASE MSR address.


Figure 280 IA32_APIC_BASE register information


Figure 281 rdmsr information


We can write model specific register (MSR) to set register values through wrmsr [-p<pcpu_id>] <msr_index> <value>.

In the following example, we can set IA32_APIC_BASE value of pCPU 1 through the command:

wrmsr -p1 1b 0xfee00c00