ACRN Debugging Tools¶

This document describes how to use ACRN tools to collect log and trace data for debugging.

ACRN Console Command¶

The ACRN console provides shell commands for a user to check system states and environment settings. See the ACRN Shell Commands documentation for a full list of commands, or see a summary of available commands by using the help command within the ACRN shell.

An example¶

As an example, we’ll show how to obtain the interrupts of a pass-through USB device.

First, we can get the USB controller BDF number (0:15.0) through the following command in the SOS console:

lspci | grep "USB controller"

Figure 211 USB controller BDF information

Second, we use the pt command in the ACRN console, and use this BDF number to find the interrupt vector (VEC) “0x31”.

Figure 212 USB controller interrupt information

Finally we use the int command in the ACRN console, and use this interrupt vector to find the interrupt number (909) on CPU3.

Figure 213 USB controller interrupt number information

ACRN Log¶

ACRN log provides console log and mem log for a user to analyze. We can use console log to debug directly, while mem log is a userland tool used to capture a ACRN hypervisor log.

Turn on the logging info¶

ACRN enables a console log by default.

To enable and start the mem log:

$ systemctl enable acrnlog
$ systemctl start acrnlog

Set and grab log¶

We have 1-6 log levels for console log and mem log. The following functions print different levels of console log and mem log:

pr_dbg("debug...level %d", LOG_DEBUG);       //level 6
pr_info("info...level %d", LOG_INFO);        //level 5
pr_warn("warn...level %d", LOG_WARNING);     //level 4
pr_err("err...level %d", LOG_ERROR);         //level 3
pr_acrnlog("acrnlog...level %d", LOG_ACRN);  //level 2
pr_fatal("fatal...level %d", LOG_FATAL);     //level 1

If the built-in logging doesn’t provide enough information, you can add additional logging in functions you want to debug, using the functions noted above. For example, add the following code into function shell_cmd_help in the source file acrn-hypervisor/hypervisor/debug/shell.c:

Figure 214 shell_cmd_help added information

Once you have instrumented the code, you need to rebuild the hypervisor and install it on your platform. Refer to Build ACRN from Source and Getting started guide for Intel NUC for detailed instructions on how to do that.

We set console log level to 5, and mem log level to 2 through the command:

loglevel 5 2

Then we input help into the ACRN console (this is the command that we have just instrumented with additional log information), and check the log as follows.

Figure 215 console log information

Then we use the command, on the ACRN console:

vm_console

to switch to the SOS console. Then we use the command:

cat /tmp/acrnlog/acrnlog_cur.0

and we will see the following log:

Figure 216 mem log information

ACRN Trace¶

ACRN trace is a tool running on the Service OS (SOS) to capture trace data. We can use the existing trace information to analyze, and we can add self-defined tracing to analyze code which we care about.

Using Existing trace event id to analyze trace¶

As an example, we can use the existing vm_exit trace to analyze the reason and times of each vm_exit after we have done some operations.

Run the following SOS console command to collect trace data:
```
# acrntrace -c
```
Check current directory, and confirm the directory contains four trace files:
```
# ls
0 1 2 3
```
Use the command to get a summary of vmexit:
```
# acrnalyze.py -i /home/trace/acrntrace/20190219-001529/1 -o vmexit --vm_exit
```
Note

The acrnalyze.py script is in the acrn-hypervisor/tools/acrntrace/scripts folder. The location of the trace files produced by acrntrace may be different in your system.

Figure 217 vmexit summary information

Using Self-defined trace event id to analyze trace¶

For some undefined trace event id, we can define it by ourselves as shown in the following example:

Add the following new event id into acrn-hypervisor/hypervisor/include/debug/trace.h:

Figure 218 trace event id
Add the following format to acrn-hypervisor/tools/acrntrace/scripts/formats:

Figure 219 acrntrace formatted information

Note

Formats:

0x00000005: event id for trace test

%(cpu)d: corresponding cpu index with ‘decimal’ format

%(event)016x: corresponding event id with ‘hex’ format

%(tsc)d: corresponding event time stamp with ‘decimal’ format

%(1)08x: corresponding first ‘Long’ data in TRACE_2L
Add trace into function emulate_io in acrn-hypervisor/hypervisor/arch/x86/guest/io_emul.c which we want to trace for the calling times of function emulate_io:

Figure 220 inserted trace information
After we have inserted the trace code addition, we need to rebuild the ACRN hypervisor and install it on the platform. Refer to Build ACRN from Source and Getting started guide for Intel NUC for detailed instructions on how to do that.
Now we can use the following command in the SOS console to generate acrntrace data into the current directory:
```
acrntrace -c
```
Figure 221 trace collection
Run the console command:
```
# acrntrace_format.py \
  formats /home/trace/acrntrace/20190219-001529/1 | grep "trace test"
```
Note

The acrnalyze.py script is in the acrn-hypervisor/tools/acrntrace/scripts folder. The location of the trace files produced by acrntrace may be different in your system.

and we will get the following log:

Figure 222 trace collection

Note

The trace data may generate on any of the available CPUs, so you’ll need to check which CPU number was used and specify that CPU to analyze its trace.