Hypercall APIs¶

This section contains APIs for the hypercall services. Sources for the Device Model are found in the ACRN Hypervisor GitHub repo

group acrn_hypercall

Hypercall.

Defines

GSI_SET_HIGH¶: Operation types for setting IRQ line

GSI_SET_LOW¶

GSI_RAISING_PULSE¶

GSI_FALLING_PULSE¶

SPACE_SYSTEM_MEMORY¶: Info The power state data of a VCPU.

SPACE_SYSTEM_IO¶

SPACE_PCI_CONFIG¶

SPACE_Embedded_Control¶

SPACE_SMBUS¶

SPACE_PLATFORM_COMM¶

SPACE_FFixedHW¶

PMCMD_VMID_MASK¶

Info PM command from DM/VHM.

The command would specify request type(e.g. get px count or data) for specific VM and specific VCPU with specific state number. For Px, PMCMD_STATE_NUM means Px number from 0 to (MAX_PSTATE - 1), For Cx, PMCMD_STATE_NUM means Cx entry index from 1 to MAX_CX_ENTRY.

PMCMD_VCPUID_MASK¶

PMCMD_STATE_NUM_MASK¶

PMCMD_TYPE_MASK¶

PMCMD_VMID_SHIFT¶

PMCMD_VCPUID_SHIFT¶

PMCMD_STATE_NUM_SHIFT¶

MAX_PTDEV_NUM¶

Info to get a VM interrupt count data.

the parameter for HC_VM_INTR_MONITOR hypercall

INTR_CMD_GET_DATA¶: cmd for intr monitor

INTR_CMD_DELAY_INT¶

Enums

enum pm_cmd_type¶

Values:

PMCMD_GET_PX_CNT¶

PMCMD_GET_PX_DATA¶

PMCMD_GET_CX_CNT¶

PMCMD_GET_CX_DATA¶

Functions

int32_t hcall_sos_offline_cpu(struct acrn_vm *vm, uint64_t lapicid)¶

offline vcpu from SOS

The function offline specific vcpu from SOS.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
lapicid: lapic id of the vcpu which wants to offline

int32_t hcall_get_api_version(struct acrn_vm *vm, uint64_t param)¶

Get hypervisor api version.

The function only return api version information when VM is VM0.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
param: guest physical memory address. The api version returned will be copied to this gpa

int32_t hcall_create_vm(struct acrn_vm *vm, uint64_t param)¶

create virtual machine

Create a virtual machine based on parameter, currently there is no limitation for calling times of this function, will add MAX_VM_NUM support later.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
param: guest physical memory address. This gpa points to struct acrn_create_vm

int32_t hcall_destroy_vm(uint16_t vmid)¶

destroy virtual machine

Destroy a virtual machine, it will pause target VM then shutdown it. The function will return -1 if the target VM does not exist.

Return

0 on success, non-zero on error.

Parameters

vmid: ID of the VM

int32_t hcall_reset_vm(uint16_t vmid)¶

reset virtual machine

Reset a virtual machine, it will make target VM rerun from pre-defined entry. Comparing to start vm, this function reset each vcpu state and do some initialization for guest. The function will return -1 if the target VM does not exist.

Return

0 on success, non-zero on error.

Parameters

vmid: ID of the VM

int32_t hcall_start_vm(uint16_t vmid)¶

start virtual machine

Start a virtual machine, it will schedule target VM’s vcpu to run. The function will return -1 if the target VM does not exist or the IOReq buffer page for the VM is not ready.

Return

0 on success, non-zero on error.

Parameters

vmid: ID of the VM

int32_t hcall_pause_vm(uint16_t vmid)¶

pause virtual machine

Pause a virtual machine, if the VM is already paused, the function will return 0 directly for success. The function will return -1 if the target VM does not exist.

Return

0 on success, non-zero on error.

Parameters

vmid: ID of the VM

int32_t hcall_create_vcpu(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

create vcpu

Create a vcpu based on parameter for a VM, it will allocate vcpu from freed physical cpus, if there is no available pcpu, the function will return -1.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: guest physical address. This gpa points to struct acrn_create_vcpu

int32_t hcall_set_vcpu_regs(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

set vcpu regs

Set the vcpu regs. It will set the vcpu init regs from DM. Now, it’s only applied to BSP. AP always uses fixed init regs. The function will return -1 if the targat VM or BSP doesn’t exist.

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: guest physical address. This gpa points to struct acrn_vcpu_regs

int32_t hcall_set_irqline(const struct acrn_vm *vm, uint16_t vmid, const struct acrn_irqline_ops *ops)¶

set or clear IRQ line

Set or clear a virtual IRQ line for a VM, which could be from ISA or IOAPIC, normally it triggers an edge IRQ. The function will return -1 if the target VM does not exist.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
ops: request command for IRQ set or clear

int32_t hcall_inject_msi(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

inject MSI interrupt

Inject a MSI interrupt for a VM. The function will return -1 if the target VM does not exist.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: guest physical address. This gpa points to struct acrn_msi_entry

int32_t hcall_set_ioreq_buffer(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

set ioreq shared buffer

Set the ioreq share buffer for a VM. The function will return -1 if the target VM does not exist.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: guest physical address. This gpa points to struct acrn_set_ioreq_buffer

int32_t hcall_notify_ioreq_finish(uint16_t vmid, uint16_t vcpu_id)¶

notify request done

Notify the requestor VCPU for the completion of an ioreq. The function will return -1 if the target VM does not exist.

Return

0 on success, non-zero on error.

Parameters

vmid: ID of the VM
vcpu_id: vcpu ID of the requestor

int32_t hcall_set_vm_memory_regions(struct acrn_vm *vm, uint64_t param)¶

setup ept memory mapping for multi regions

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
param: guest physical address. This gpa points to struct set_memmaps

int32_t hcall_write_protect_page(struct acrn_vm *vm, uint16_t vmid, uint64_t wp_gpa)¶

change guest memory page write permission

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
wp_gpa: guest physical address. This gpa points to struct wp_data

int32_t hcall_gpa_to_hpa(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

translate guest physical address to host physical address

Translate guest physical address to host physical address for a VM. The function will return -1 if the target VM does not exist.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: guest physical address. This gpa points to struct vm_gpa2hpa

int32_t hcall_assign_ptdev(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

Assign one passthrough dev to VM.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: the physical BDF of the assigning ptdev To keep the compatibility it still can be the guest physical address that points to the physical BDF of the assigning ptdev.(Depreciated)

int32_t hcall_deassign_ptdev(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

Deassign one passthrough dev from VM.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: the physical BDF of the deassigning ptdev To keep the compatibility it still can be the guest physical address that points to the physical BDF of the deassigning ptdev.(Depreciated)

int32_t hcall_set_ptdev_intr_info(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

Set interrupt mapping info of ptdev.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: guest physical address. This gpa points to data structure of hc_ptdev_irq including intr remapping info

int32_t hcall_reset_ptdev_intr_info(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

Clear interrupt mapping info of ptdev.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
vmid: ID of the VM
param: guest physical address. This gpa points to data structure of hc_ptdev_irq including intr remapping info

int32_t hcall_debug(struct acrn_vm *vm, uint64_t param1, uint64_t param2, uint64_t hypcall_id)¶

Setup hypervisor debug infrastructure, such as share buffer, NPK log and profiling.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
param1: hypercall param1 from guest
param2: hypercall param2 from guest
hypcall_id: hypercall ID from guest

int32_t hcall_get_cpu_pm_state(struct acrn_vm *vm, uint64_t cmd, uint64_t param)¶

Get VCPU Power state.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: pointer to VM data structure
cmd: cmd to show get which VCPU power state data
param: VCPU power state data

int32_t hcall_vm_intr_monitor(struct acrn_vm *vm, uint16_t vmid, uint64_t param)¶

Get VCPU a VM’s interrupt count data.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: pointer to VM data structure
vmid: id of the VM
param: guest physical address. This gpa points to data structure of acrn_intr_monitor

int32_t hcall_set_callback_vector(const struct acrn_vm *vm, uint64_t param)¶

set upcall notifier vector

This is the API that helps to switch the notifer vecotr. If this API is not called, the hypervisor will use the default notifier vector(0xF7) to notify the SOS kernel.

Pre

Pointer vm shall point to VM0

Return

0 on success, non-zero on error.

Parameters

vm: Pointer to VM data structure
param: the expected notifier vector from guest

struct mmio_request¶

#include <acrn_common.h>

Representation of a MMIO request.

Public Members

uint32_t direction¶

Direction of the access.

Either REQUEST_READ or REQUEST_WRITE.

uint32_t reserved¶: reserved

uint64_t address¶: Address of the I/O access.

uint64_t size¶: Width of the I/O access in byte.

uint64_t value¶: The value read for I/O reads or to be written for I/O writes.

struct pio_request¶

#include <acrn_common.h>

Representation of a port I/O request.

Public Members

uint32_t direction¶

Direction of the access.

Either REQUEST_READ or REQUEST_WRITE.

uint32_t reserved¶: reserved

uint64_t address¶: Port address of the I/O access.

uint64_t size¶: Width of the I/O access in byte.

uint32_t value¶: The value read for I/O reads or to be written for I/O writes.

struct pci_request¶

#include <acrn_common.h>

Representation of a PCI configuration space access.

Public Members

uint32_t direction¶

Direction of the access.

Either REQUEST_READ or REQUEST_WRITE.

uint32_t reserved[3]¶: Reserved.

int64_t size¶: Width of the I/O access in byte.

int32_t value¶: The value read for I/O reads or to be written for I/O writes.

int32_t bus¶: The bus part of the BDF of the device.

int32_t dev¶: The device part of the BDF of the device.

int32_t func¶: The function part of the BDF of the device.

int32_t reg¶: The register to be accessed in the configuration space.

union vhm_io_request¶

#include <acrn_common.h>

Public Members

struct pio_request pio¶

struct pci_request pci¶

struct mmio_request mmio¶

int64_t reserved1[8]¶

struct vhm_request¶

#include <acrn_common.h>

256-byte VHM requests

The state transitions of a VHM request are:

FREE -> PENDING -> PROCESSING -> COMPLETE -> FREE -> …

When a request is in COMPLETE or FREE state, the request is owned by the hypervisor. SOS (VHM or DM) shall not read or write the internals of the request except the state.

When a request is in PENDING or PROCESSING state, the request is owned by SOS. The hypervisor shall not read or write the request other than the state.

Based on the rules above, a typical VHM request lifecycle should looks like the following.

SOS vCPU 0	SOS vCPU x	UOS vCPU y
		Hypervisor: Fill in type, addr, etc. Pause UOS vCPU y Set state to PENDING (a) Fire upcall to SOS vCPU 0
VHM: Scan for pending requests Set state to PROCESSING (b) Assign requests to clients (c)
	Client: Scan for assigned requests Handle the requests (d) Set state to COMPLETE Notify the hypervisor
	Hypervisor: resume UOS vCPU y (e)
		Hypervisor: Post-work (f) set state to FREE

Note that the following shall hold.

(a) happens before (b)
(c) happens before (d)
(e) happens before (f)
One vCPU cannot trigger another I/O request before the previous one has completed (i.e. the state switched to FREE)

Accesses to the state of a vhm_request shall be atomic and proper barriers are needed to ensure that:

Setting state to PENDING is the last operation when issuing a request in the hypervisor, as the hypervisor shall not access the request any more.
Due to similar reasons, setting state to COMPLETE is the last operation of request handling in VHM or clients in SOS.

Public Members

uint32_t type¶

Type of this request.

Byte offset: 0.

uint32_t completion_polling¶

Hypervisor will poll completion if set.

Byte offset: 4.

uint32_t reserved0[14]¶

Reserved.

Byte offset: 8.

union vhm_io_request reqs¶

Details about this request.

For REQ_PORTIO, this has type pio_request. For REQ_MMIO and REQ_WP, this has type mmio_request. For REQ_PCICFG, this has type pci_request.

Byte offset: 64.

uint32_t reserved1¶

Reserved.

Byte offset: 128.

int32_t client¶

The client which is distributed to handle this request.

Accessed by VHM only.

Byte offset: 132.

uint32_t processed¶

The status of this request.

Taking REQ_STATE_xxx as values.

Byte offset: 136.

union vhm_request_buffer¶

#include <acrn_common.h>

Public Members

struct vhm_request req_queue[VHM_REQUEST_MAX]¶

int8_t reserved[4096]¶

struct acrn_create_vm¶

#include <acrn_common.h>

Info to create a VM, the parameter for HC_CREATE_VM hypercall.

Public Members

uint16_t vmid¶: created vmid return to VHM. Keep it first field

uint16_t reserved0¶: Reserved

uint16_t vcpu_num¶: VCPU numbers this VM want to create

uint16_t reserved1¶: Reserved

uint8_t GUID[16]¶: the GUID of this VM

uint64_t vm_flag¶

uint8_t reserved2[24]¶: Reserved for future use

struct acrn_create_vcpu¶

#include <acrn_common.h>

Info to create a VCPU.

the parameter for HC_CREATE_VCPU hypercall

Public Members

uint16_t vcpu_id¶: the virtual CPU ID for the VCPU created

uint16_t pcpu_id¶: the physical CPU ID for the VCPU created

struct acrn_gp_regs¶

#include <acrn_common.h>

Public Members

uint64_t rax¶

uint64_t rcx¶

uint64_t rdx¶

uint64_t rbx¶

uint64_t rsp¶

uint64_t rbp¶

uint64_t rsi¶

uint64_t rdi¶

uint64_t r8¶

uint64_t r9¶

uint64_t r10¶

uint64_t r11¶

uint64_t r12¶

uint64_t r13¶

uint64_t r14¶

uint64_t r15¶

struct acrn_descriptor_ptr¶

#include <acrn_common.h>

Public Members

uint16_t limit¶

uint64_t base¶

uint16_t reserved[3]¶

struct acrn_vcpu_regs¶

#include <acrn_common.h>

registers info for vcpu.

Public Members

struct acrn_gp_regs gprs¶

struct acrn_descriptor_ptr gdt¶

struct acrn_descriptor_ptr idt¶

uint64_t rip¶

uint64_t cs_base¶

uint64_t cr0¶

uint64_t cr4¶

uint64_t cr3¶

uint64_t ia32_efer¶

uint64_t rflags¶

uint64_t reserved_64[4]¶

uint32_t cs_ar¶

uint32_t cs_limit¶

uint32_t reserved_32[3]¶

uint16_t cs_sel¶

uint16_t ss_sel¶

uint16_t ds_sel¶

uint16_t es_sel¶

uint16_t fs_sel¶

uint16_t gs_sel¶

uint16_t ldt_sel¶

uint16_t tr_sel¶

uint16_t reserved_16[4]¶

struct acrn_set_vcpu_regs¶

#include <acrn_common.h>

Info to set vcpu state.

the pamameter for HC_SET_VCPU_STATE

Public Members

uint16_t vcpu_id¶: the virtual CPU ID for the VCPU to set state

uint16_t reserved0[3]¶: reserved space to make cpu_state aligned to 8 bytes

struct acrn_vcpu_regs vcpu_regs¶: the structure to hold vcpu state

struct acrn_set_ioreq_buffer¶

#include <acrn_common.h>

Info to set ioreq buffer for a created VM.

the parameter for HC_SET_IOREQ_BUFFER hypercall

Public Members

uint64_t req_buf¶: guest physical address of VM request_buffer

struct acrn_irqline_ops¶

#include <acrn_common.h>

Info to Set/Clear/Pulse a virtual IRQ line for a VM.

the parameter for HC_SET_IRQLINE hypercall

Public Members

uint32_t gsi¶

uint32_t op¶

struct acrn_msi_entry¶

#include <acrn_common.h>

Info to inject a MSI interrupt to VM.

the parameter for HC_INJECT_MSI hypercall

Public Members

uint64_t msi_addr¶: MSI addr[19:12] with dest VCPU ID

uint64_t msi_data¶: MSI data[7:0] with vector

struct acrn_nmi_entry¶

#include <acrn_common.h>

Info to inject a NMI interrupt for a VM.

Public Members

uint16_t vcpu_id¶: virtual CPU ID to inject

uint16_t reserved0¶: Reserved

uint32_t reserved1¶: Reserved

struct acrn_vm_pci_msix_remap¶

#include <acrn_common.h>

Info to remap pass-through PCI MSI for a VM.

the parameter for HC_VM_PCI_MSIX_REMAP hypercall

Public Members

uint16_t virt_bdf¶: pass-through PCI device virtual BDF#

uint16_t phys_bdf¶: pass-through PCI device physical BDF#

uint16_t msi_ctl¶: pass-through PCI device MSI/MSI-X cap control data

uint16_t reserved¶: reserved for alignment padding

uint64_t msi_addr¶: pass-through PCI device MSI address to remap, which will return the caller after remapping

uint32_t msi_data¶: pass-through PCI device MSI data to remap, which will return the caller after remapping

int32_t msix¶: pass-through PCI device is MSI or MSI-X 0 - MSI, 1 - MSI-X

uint32_t msix_entry_index¶: if the pass-through PCI device is MSI-X, this field contains the MSI-X entry table index

uint32_t vector_ctl¶: if the pass-through PCI device is MSI-X, this field contains Vector Control for MSI-X Entry, field defined in MSI-X spec

struct acpi_generic_address¶

#include <acrn_common.h>

Public Members

uint8_t space_id¶

uint8_t bit_width¶

uint8_t bit_offset¶

uint8_t access_size¶

uint64_t address¶

struct cpu_cx_data¶

#include <acrn_common.h>

Public Members

struct acpi_generic_address cx_reg¶

uint8_t type¶

uint32_t latency¶

uint64_t power¶

struct cpu_px_data¶

#include <acrn_common.h>

Public Members

uint64_t core_frequency¶

uint64_t power¶

uint64_t transition_latency¶

uint64_t bus_master_latency¶

uint64_t control¶

uint64_t status¶

struct acpi_sx_pkg¶

#include <acrn_common.h>

Public Members

uint8_t val_pm1a¶

uint8_t val_pm1b¶

uint16_t reserved¶

struct pm_s_state_data¶

#include <acrn_common.h>

Public Members

struct acpi_generic_address pm1a_evt¶

struct acpi_generic_address pm1b_evt¶

struct acpi_generic_address pm1a_cnt¶

struct acpi_generic_address pm1b_cnt¶

struct acpi_sx_pkg s3_pkg¶

struct acpi_sx_pkg s5_pkg¶

uint32_t *wake_vector_32¶

uint64_t *wake_vector_64¶

struct acrn_intr_monitor¶

#include <acrn_common.h>

Public Members

uint32_t cmd¶: sub command for intr monitor

uint32_t buf_cnt¶: the count of this buffer to save

uint64_t buffer[MAX_PTDEV_NUM * 2]¶: the buffer which save each interrupt count

struct vm_memory_region¶

#include <acrn_hv_defs.h>

Info to set guest memory region mapping.

the parameter for HC_VM_SET_MEMORY_REGION hypercall

Public Members

uint32_t type¶: set memory region type: MR_ADD or MAP_DEL

uint32_t prot¶: memory attributes: memory type + RWX access right

uint64_t gpa¶: the beginning guest physical address of the memory reion

uint64_t vm0_gpa¶: VM0’s guest physcial address which gpa will be mapped to

uint64_t size¶: size of the memory region

struct set_regions¶

#include <acrn_hv_defs.h>

set multi memory regions, used for HC_VM_SET_MEMORY_REGIONS

Public Members

uint16_t vmid¶: vmid for this hypercall

uint16_t reserved0¶: Reserved

uint32_t reserved1¶: Reserved

uint32_t mr_num¶: memory region numbers

uint64_t regions_gpa¶: the gpa of regions buffer, point to the regions array: struct vm_memory_region regions[mr_num] the max buffer size is one page.

struct wp_data¶

#include <acrn_hv_defs.h>

Info to change guest one page write protect permission.

the parameter for HC_VM_WRITE_PROTECT_PAGE hypercall

Public Members

uint8_t set¶: set page write protect permission. ture: set the wp; flase: clear the wp

uint64_t pad¶: Reserved

uint64_t gpa¶: the guest physical address of the page to change

struct sbuf_setup_param¶

#include <acrn_hv_defs.h>

Setup parameter for share buffer, used for HC_SETUP_SBUF hypercall

Public Members

uint16_t pcpu_id¶: sbuf physical cpu id

uint16_t reserved¶: Reserved

uint32_t sbuf_id¶: sbuf id

uint64_t gpa¶: sbuf’s guest physical address

struct hv_npk_log_param¶

#include <acrn_hv_defs.h>

Info to setup the hypervisor NPK log.

the parameter for HC_SETUP_HV_NPK_LOG hypercall

Public Members

uint16_t cmd¶: the setup command for the hypervisor NPK log

uint16_t res¶: the setup result for the hypervisor NPK log

uint16_t loglevel¶: the loglevel for the hypervisor NPK log

uint16_t reserved¶: Reserved

uint64_t mmio_addr¶: the MMIO address for the hypervisor NPK log

struct acrn_hw_info¶

#include <acrn_hv_defs.h>

the parameter for HC_GET_HW_INFO hypercall

Public Members

uint16_t cpu_num¶

uint16_t reserved[3]¶

struct vm_gpa2hpa¶

#include <acrn_hv_defs.h>

Gpa to hpa translation parameter, used for HC_VM_GPA2HPA hypercall

Public Members

uint64_t gpa¶: gpa to do translation

uint64_t hpa¶: hpa to return after translation

struct hc_ptdev_irq¶

#include <acrn_hv_defs.h>

Intr mapping info per ptdev, the parameter for HC_SET_PTDEV_INTR_INFO hypercall

Public Members

uint32_t type¶: irq mapping type: INTX or MSI

uint16_t virt_bdf¶: virtual BDF of the ptdev

uint16_t phys_bdf¶: physical BDF of the ptdev

union hc_ptdev_irq::@2 hc_ptdev_irq::is

union

Public Members

: INTX remapping info

: MSIx remapping info

struct

INTX remapping info

Public Members

: virtual IOAPIC/PIC pin

: Reserved

: physical IOAPIC pin

: Reserved

: is virtual pin from PIC

: Reserved

struct

MSIx remapping info

Public Members

: vector count of MSI/MSIX

struct hc_api_version¶

#include <acrn_hv_defs.h>

Hypervisor api version info, return it for HC_GET_API_VERSION hypercall

Public Members

uint32_t major_version¶: hypervisor api major version

uint32_t minor_version¶: hypervisor api minor version

struct trusty_boot_param¶

#include <acrn_hv_defs.h>

Trusty boot params, used for HC_INITIALIZE_TRUSTY

Public Members

uint32_t size_of_this_struct¶: sizeof this structure

uint32_t version¶: version of this structure

uint32_t base_addr¶: trusty runtime memory base address

uint32_t entry_point¶: trusty entry point

uint32_t mem_size¶: trusty runtime memory size

uint32_t padding¶: padding

uint32_t base_addr_high¶: trusty runtime memory base address (high 32bit)

uint32_t entry_point_high¶: trusty entry point (high 32bit)

uint8_t rpmb_key[64]¶: rpmb key