acrntrace

Description

acrntrace is a tool running on the Service OS (SOS) to capture trace data. A scripts directory includes scripts to analyze the trace data.

Usage

The acrntrace tool runs on the Service OS (SOS) to capture trace data and output to trace file under /tmp/acrntrace with raw (binary) data format.

Options:

-h print this message
-i period specify polling interval in milliseconds [1-999]
-t max_time max time to capture trace data (in second)
-c clear the buffered old data
-r free_space amount of free space (in MB) remaining on the disk before acrntrace stops

The acrntrace_format.py is a offline tool for parsing trace data (as output by acrntrace) to human-readable formats based on given format.

Here’s an explanation of the tool’s parameters:

acrntrace_format.py [options] [formats] [trace_data]

Options:

-h print this message

formats file specifies the rules to reformat the trace_data collected by acrntrace into a human-readable text form. The rules in this file are of the form:

event_id  text_format_string

The text_format_string may include format specifiers, such as %(cpu)d, %(tsc)d, %(event)d, %(1)d, and %(2)d. The ‘d’ format specifier outputs in decimal, alternatively ‘x’ will output in hexadecimal and ‘o’ will output in octal.

These respectively correspond to the CPU number (cpu), timestamp counter (tsc), event ID (event) and the data logged in the trace file. There can be only one such rule for each type of event.

An example formats_file is available in the acrn_hypervisor repo in hypervisor/tools/acrntrace/scripts/formats.

The acrnalyze.py is a offline tool to analyze trace data (as output by acrntrace) based on given analyzer, such as vm_exit or irq.

Options:

-h print this message
-i, --ifile=string
 input file name
-o, --ofile=string
 output filename
-f, --frequency=unsigned_int
 TSC frequency in MHz
--vm_exit generate a vm_exit report
--irq generate an IRQ-related report

Note

We depend on TSC frequency to do time-based analysis. Please configure the right TSC frequency that acrn runs on. TSC frequency can be obtained from the ACRN console log (calibrate_tsc, tsc_hz=xxx) when the hypervisor boots.

The tool does not take into account CPU frequency variation that can occur during normal operation (aka CPU throttling) on the processor which doesn’t support for invariant TSC. The results may therefore not be completely accurate in that regard.

Here’s a typical use of acrntrace to capture trace data from the SOS, converting the binary data to human-readable form, copying the processed trace data to your linux system, and running the analysis tool.

  1. On the SOS, clear buffers before starting a trace, with:

    # acrntrace -c
    
  2. Start capturing buffered trace data with:

    # acrntrace
    

    512MB storage space will be reserved by default. This ensures that acrntrace will exit automatically when the free storage space on the disk is less than reserved space. Reserved space on the disk is configurable through ‘-r’.

    Trace files are created under /tmp/acrntrace/, with a date-time-based directory name such as 20171115-101605

  3. When done, stop a running acrntrace, with:

    q <enter>
    
  4. Convert trace data to human-readable format, with:

    # acrntrace_format.py formats trace_data
    

    Trace data will be converted to human-readable format based on given format and printed to stdout.

  5. Analysis of the collected data is done on a Linux PC, so you’ll need to copy the collected trace data to your Linux system (using scp is recommended):

    # scp -r /tmp/acrntrace/20171115-101605/ \
        username@hostname:/home/username/trace_data
    

    Replace username and hostname with appropriate values.

  6. On the Linux system, run the provided Python3 script to analyze the vm_exits, irq:

    # acrnalyze.py -i /home/xxxx/trace_data/20171115-101605/0 \
         -o /home/xxxx/trace_data/20171115-101605/cpu0 --vm_exit --irq
    
    • Analysis report is written to stdout, or to a CSV file if a filename is specified using -o filename.
    • The scripts require Python3.

Build and Install

The source files for acrntrace are in the tools/acrntrace folder, and can be built and installed using:

# make
# make install

The processing scripts are in tools/acrntrace/scripts and need to be copied to and run on your Linux system.