CPU Virtualization

../../_images/hld-image47.png

Figure 44 ACRN Hypervisor CPU Virtualization Components

The following sections discuss the major modules (shown in blue) in the CPU virtualization overview shown in Figure 44.

Based on Intel VT-x virtualization technology, ACRN emulates a virtual CPU (vCPU) with the following methods:

  • core partition: one vCPU is dedicated and associated with one physical CPU (pCPU), making much of hardware register emulation simply pass-through and provides good isolation for physical interrupt and guest execution. (See Static CPU Partitioning for more information.)
  • simple schedule: only two thread loops are maintained for a CPU - vCPU thread and default idle thread. A CPU runs most of the time in the vCPU thread for emulating a guest CPU, switching between VMX root mode and non-root mode. A CPU schedules out to default idle when an operation needs it to stay in VMX root mode, such as when waiting for an I/O request from DM or ready to destroy.

Static CPU Partitioning

CPU partitioning is a policy for mapping a virtual CPU (VCPU) to a physical CPU. The current ACRN implementation forces a static 1:1 mapping between VCPUs and physical CPUs and does not support multiple VCPUs running on a physical CPU and does not support VCPU migration from one physical CPU to another.

ACRN forces a fixed 1:1 mapping between a VCPU and a physical CPU when creating a VCPU for the guest Operating System. This makes the VCPU management code much simpler.

An array is used to track the physical CPU allocation information. When a VCPU is created, we query, allocate, and update the array to map the VCPU to an available physical CPU.

The physical CPU number assignment for each guest is pre-defined. For example, on a platform with four CPU cores, one physical CPU is assigned to run the Service Operating System (SOS) and other three physical CPUs are assigned to run the User Operating System (UOS) instances.

Note

To improvement SOS boot time, all physical CPUs are assigned to the SOS during the SOS boot. Afterward, the physical CPUs defined for the UOS are allocated by the Device Model (DM) by running the launch_uos.sh script.

CPU management in SOS

With ACRN, all ACPI table entries are pass-thru to the SOS, including the Multiple Interrupt Controller Table (MADT). The SOS sees all physical CPUs by parsing the MADT when the SOS kernel boots. All physical CPUs are initially assigned to the SOS by creating the same number of virtual CPUs.

When the SOS boot is finished, it releases the physical CPUs intended for UOS use.

Here is an example flow of CPU allocation on a multi-core platform.

../../_images/static-core-image2.png

Figure 45 CPU allocation on a multi-core platform

CPU management in UOS

From the UOS point of view, CPU management is very simple, using a hypercall to create the virtual CPUs. Here’s an example from from the DM code:

int vm_create_vcpu(struct vmctx *ctx, uint16_t vcpu_id)
{
   struct acrn_create_vcpu cv;
   int error;

   bzero(&cv, sizeof(struct acrn_create_vcpu));
   cv.vcpu_id = vcpu_id;
   error = ioctl(ctx->fd, IC_CREATE_VCPU, &cv);
   return error;
}

The VHM will respond to the ioctl:

case IC_CREATE_VCPU: {
   struct acrn_create_vcpu cv;

   if (copy_from_user(&cv, (void *)ioctl_param,
                      sizeof(struct acrn_create_vcpu)))
      return -EFAULT;

   ret = acrn_hypercall2(HC_CREATE_VCPU, vm->vmid,
                         virt_to_phys(&cv));
   if (ret < 0) {
      pr_err("vhm: failed to create vcpu %d!\\n",
              cv.vcpu_id);
      return -EFAULT;
   }

   atomic_inc(&vm->vcpu_num);
   return ret;
}

The hypercall HC_CREATE_VCPU is handled in the hypervisor with the parameter:

struct acrn_create_vcpu

Info to create a VCPU.

the parameter for HC_CREATE_VCPU hypercall

Public Members

uint16_t vcpu_id

the virtual CPU ID for the VCPU created

uint16_t pcpu_id

the physical CPU ID for the VCPU created

CPU assignment management in HV

When we create a VCPU in the hypervisor, an available physical CPU is picked and marked as used. When we destroy the VCPU, we mark the physical CPU as available again.

../../_images/static-core-image1.png

Figure 46 HV CPU Assignment Management

  1. allocate_pcpu() queries the physical CPU allocation info to get an available physical CPU and marks physical CPU as not available
  2. Physical CPU info is passed to create_vcpu() and a mapping is built between the physical CPU and virtual CPU
  3. When the VCPU is destroyed VCPU, the physical CPU is passed to the free_pcpu() function
  4. free_pcpu() marks the physical CPU available again.

Currently, the ACRN hypervisor does not support virtual CPU migration to different physical CPUs. This means no changes to the virtual CPU to physical CPU can happen without first calling destroy_vcpu.

vCPU Lifecycle

A vCPU lifecycle is shown in Figure 47 below, where the major states are:

  • VCPU_INIT: vCPU is in an initialized state, and its associated CPU is running in default_idle
  • VCPU_RUNNING: vCPU is running, and its associated CPU is running in vcpu_thread
  • VCPU_PAUSED: vCPU is paused, and its associated CPU is running in default_idle
  • VPCU_ZOMBIE: vCPU is being destroyed, and its associated CPU is running in default_idle
../../_images/hld-image17.png

Figure 47 ACRN vCPU state transitions

Following functions are used to drive the state machine of the vCPU lifecycle:

int32_t create_vcpu(uint16_t pcpu_id, struct acrn_vm *vm, struct acrn_vcpu **rtn_vcpu_handle)

create a vcpu for the target vm

Creates/allocates a vCPU instance, with initialization for its vcpu_id, vpid, vmcs, vlapic, etc. It sets the init vCPU state to VCPU_INIT

Parameters
  • pcpu_id: created vcpu will run on this pcpu
  • vm: pointer to vm data structure, this vcpu will owned by this vm.
  • rtn_vcpu_handle: pointer to the created vcpu
Return Value
  • 0: vcpu created successfully, other values failed.

void schedule_vcpu(struct acrn_vcpu *vcpu)

set the vcpu to running state, then it will be scheculed.

Adds a vCPU into the run queue and make a reschedule request for it. It sets the vCPU state to VCPU_RUNNING.

Parameters
  • vcpu: pointer to vcpu data structure

void pause_vcpu(struct acrn_vcpu *vcpu, enum vcpu_state new_state)

pause the vcpu and set new state

Change a vCPU state to VCPU_PAUSED or VCPU_ZOMBIE, and make a reschedule request for it.

Parameters
  • vcpu: pointer to vcpu data structure
  • new_state: the state to set vcpu

void resume_vcpu(struct acrn_vcpu *vcpu)

resume the vcpu

Change a vCPU state to VCPU_RUNNING, and make a reschedule request for it.

Parameters
  • vcpu: pointer to vcpu data structure

void reset_vcpu(struct acrn_vcpu *vcpu)

reset vcpu state and values

Reset all fields in a vCPU instance, the vCPU state is reset to VCPU_INIT.

Parameters
  • vcpu: pointer to vcpu data structure

int32_t run_vcpu(struct acrn_vcpu *vcpu)

run into non-root mode based on vcpu setting

An interface in vCPU thread to implement VM entry and VM exit. A CPU switches between VMX root mode and non-root mode based on it.

Pre
vcpu != NULL
Parameters
  • vcpu: pointer to vcpu data structure
Return Value
  • 0: vcpu run successfully, other values failed.

vCPU Scheduling

../../_images/hld-image35.png

Figure 48 ACRN vCPU scheduling flow

As describes in the CPU virtualization overview, ACRN implements a simple scheduling mechanism based on two threads: vcpu_thread and default_idle. A vCPU with VCPU_RUNNING state always runs in a vcpu_thread loop, meanwhile a vCPU with VCPU_PAUSED or VCPU_ZOMBIE state runs in default_idle loop. The detail behaviors in vcpu_thread and default_idle threads are illustrated in Figure 48:

  • The vcpu_thread loop will try to initialize a vCPU’s vmcs during its first launch and then do the loop of handling its associated softirq, vm exits, and pending requests around the VM entry/exit. It will also check the reschedule request then schedule out to default_idle if necessary. See vCPU Thread for more details of vcpu_thread.
  • The default_idle loop simply does do_cpu_idle while also checking for need-offline and reschedule requests. If a CPU is marked as need-offline, it will go to cpu_dead. If a reschedule request is made for this CPU, it will schedule out to vcpu_thread if necessary.
  • The function make_reschedule_request drives the thread switch between vcpu_thread and default_idle.

Some example scenario flows are shown here:

../../_images/hld-image7.png

Figure 49 ACRN vCPU scheduling scenarios

  • During starting a VM: after create a vCPU, BSP calls schedule_vcpu through start_vm, AP calls schedule_vcpu through vlapic INIT-SIPI emulation, finally this vCPU runs in a vcpu_thread loop.
  • During shutting down a VM: pause_vm function call makes a vCPU running in vcpu_thread to schedule out to default_idle. The following reset_vcpu and destroy_vcpu de-init and then destroy this vCPU instance.
  • During IOReq handling: after an IOReq is sent to DM for emulation, a vCPU running in vcpu_thread schedules out to default_idle through acrn_insert_request_wait->pause_vcpu. After DM complete the emulation for this IOReq, it calls hcall_notify_ioreq_finish->resume_vcpu and makes the vCPU schedule back to vcpu_thread to continue its guest execution.

vCPU Thread

The vCPU thread flow is a loop as shown and described below:

../../_images/hld-image68.png

Figure 50 ACRN vCPU thread

  1. Check if this is the vCPU’s first launch. If yes, do VMCS initialization. (See VMX Initialization.)
  2. Handle softirq by calling do_softirq.
  3. Handle pending request by calling acrn_handle_pending_request. (See Pending Request Handlers.)
  4. Check if vcpu_thread needs to schedule out to default_idle by reschedule request. If needed, then schedule out to default_idle.
  5. VM Enter by calling start/run_vcpu, then enter non-root mode to do guest execution.
  6. VM Exit from start/run_vcpu when guest trigger vm exit reason in non-root mode.
  7. Handle vm exit based on specific reason.
  8. Loop back to step 2.

vCPU Run Context

During a vCPU switch between root and non-root mode, the run context of the vCPU is saved and restored using this structure:

struct run_context

registers info saved for vcpu running context

Public Members

union run_context::guest_cpu_regs_t guest_cpu_regs
uint64_t cr0

The guests CR registers 0, 2, 3 and 4.

uint64_t cr2
uint64_t cr4
uint64_t rip
uint64_t rflags
uint64_t ia32_spec_ctrl
uint64_t ia32_efer
union guest_cpu_regs_t

Public Members

struct acrn_gp_regs regs
uint64_t longs[NUM_GPRS]

The vCPU handles runtime context saving by three different categories:

  • Always save/restore during vm exit/entry:
    • These registers must be saved every time vm exit, and restored every time vm entry
    • Registers include: general purpose registers, CR2, and IA32_SPEC_CTRL
    • Definition in vcpu->run_context
    • Get/Set them through vcpu_get/set_xxx
  • On-demand cache/update during vm exit/entry:
    • These registers are used frequently. They should be cached from VMCS on first time access after a VM exit, and updated to VMCS on VM entry if marked dirty
    • Registers include: RSP, RIP, EFER, RFLAGS, CR0, and CR4
    • Definition in vcpu->run_context
    • Get/Set them through vcpu_get/set_xxx
  • Always read/write from/to VMCS:
    • These registers are rarely used. Access to them is always from/to VMCS.
    • Registers are in VMCS but not list in the two cases above.
    • No definition in vcpu->run_context
    • Get/Set them through VMCS API

For the first two categories above, ACRN provides these get/set APIs:

uint64_t vcpu_get_gpreg(const struct acrn_vcpu *vcpu, uint32_t reg)

get vcpu register value

Get target vCPU’s general purpose registers value in run_context.

Return
the value of the register.
Parameters
  • vcpu: pointer to vcpu data structure
  • reg: register of the vcpu

void vcpu_set_gpreg(struct acrn_vcpu *vcpu, uint32_t reg, uint64_t val)

set vcpu register value

Set target vCPU’s general purpose registers value in run_context.

Parameters
  • vcpu: pointer to vcpu data structure
  • reg: register of the vcpu
  • val: the value set the register of the vcpu

uint64_t vcpu_get_rip(struct acrn_vcpu *vcpu)

get vcpu RIP value

Get & cache target vCPU’s RIP in run_context.

Return
the value of RIP.
Parameters
  • vcpu: pointer to vcpu data structure

void vcpu_set_rip(struct acrn_vcpu *vcpu, uint64_t val)

set vcpu RIP value

Update target vCPU’s RIP in run_context.

Parameters
  • vcpu: pointer to vcpu data structure
  • val: the value set RIP

uint64_t vcpu_get_rsp(struct acrn_vcpu *vcpu)

get vcpu RSP value

Get & cache target vCPU’s RSP in run_context.

Return
the value of RSP.
Parameters
  • vcpu: pointer to vcpu data structure

void vcpu_set_rsp(struct acrn_vcpu *vcpu, uint64_t val)

set vcpu RSP value

Update target vCPU’s RSP in run_context.

Parameters
  • vcpu: pointer to vcpu data structure
  • val: the value set RSP

uint64_t vcpu_get_efer(struct acrn_vcpu *vcpu)

get vcpu EFER value

Get & cache target vCPU’s EFER in run_context.

Return
the value of EFER.
Parameters
  • vcpu: pointer to vcpu data structure

void vcpu_set_efer(struct acrn_vcpu *vcpu, uint64_t val)

set vcpu EFER value

Update target vCPU’s EFER in run_context.

Parameters
  • vcpu: pointer to vcpu data structure
  • val: the value set EFER

uint64_t vcpu_get_rflags(struct acrn_vcpu *vcpu)

get vcpu RFLAG value

Get & cache target vCPU’s RFLAGS in run_context.

Return
the value of RFLAGS.
Parameters
  • vcpu: pointer to vcpu data structure

void vcpu_set_rflags(struct acrn_vcpu *vcpu, uint64_t val)

set vcpu RFLAGS value

Update target vCPU’s RFLAGS in run_context.

Parameters
  • vcpu: pointer to vcpu data structure
  • val: the value set RFLAGS

uint64_t vcpu_get_cr0(struct acrn_vcpu *vcpu)

get vcpu CR0 value

Get & cache target vCPU’s CR0 in run_context.

Return
the value of CR0.
Parameters
  • vcpu: pointer to vcpu data structure

void vcpu_set_cr0(struct acrn_vcpu *vcpu, uint64_t val)

set vcpu CR0 value

Update target vCPU’s CR0 in run_context.

Parameters
  • vcpu: pointer to vcpu data structure
  • val: the value set CR0

uint64_t vcpu_get_cr2(const struct acrn_vcpu *vcpu)

get vcpu CR2 value

Get & cache target vCPU’s CR2 in run_context.

Return
the value of CR2.
Parameters
  • vcpu: pointer to vcpu data structure

void vcpu_set_cr2(struct acrn_vcpu *vcpu, uint64_t val)

set vcpu CR2 value

Update target vCPU’s CR2 in run_context.

Parameters
  • vcpu: pointer to vcpu data structure
  • val: the value set CR2

uint64_t vcpu_get_cr4(struct acrn_vcpu *vcpu)

get vcpu CR4 value

Get & cache target vCPU’s CR4 in run_context.

Return
the value of CR4.
Parameters
  • vcpu: pointer to vcpu data structure

void vcpu_set_cr4(struct acrn_vcpu *vcpu, uint64_t val)

set vcpu CR4 value

Update target vCPU’s CR4 in run_context.

Parameters
  • vcpu: pointer to vcpu data structure
  • val: the value set CR4

VM Exit Handlers

ACRN implements its VM exit handlers with a static table. Except for the exit reasons listed below, a default unhandled_vmexit_handler is used that will trigger an error message and return without handling:

VM Exit Reason Handler Desc
VMX_EXIT_REASON_EXCEPTION_OR_NMI exception_vmexit_handler Only trap #MC, print error then inject back to guest
VMX_EXIT_REASON_EXTERNAL_INTERRUPT external_interrupt_vmexit_handler External interrupt handler for physical interrupt happening in non-root mode
VMX_EXIT_REASON_INTERRUPT_WINDOW interrupt_window_vmexit_handler To support interrupt window if VID is disabled
VMX_EXIT_REASON_CPUID cpuid_vmexit_handler Handle CPUID access from guest
VMX_EXIT_REASON_VMCALL vmcall_vmexit_handler Handle hypercall from guest
VMX_EXIT_REASON_CR_ACCESS cr_access_vmexit_handler Handle CR registers access from guest
VMX_EXIT_REASON_IO_INSTRUCTION pio_instr_vmexit_handler Emulate I/O access with range in IO_BITMAP, which may have a handler in hypervisor (such as vuart or vpic), or need to create an I/O request to DM
VMX_EXIT_REASON_RDMSR rdmsr_vmexit_handler Read MSR from guest in MSR_BITMAP
VMX_EXIT_REASON_WRMSR wrmsr_vmexit_handler Write MSR from guest in MSR_BITMAP
VMX_EXIT_REASON_APIC_ACCESS apic_access_vmexit_handler APIC access for APICv
VMX_EXIT_REASON_VIRTUALIZED_EOI veoi_vmexit_handler Trap vLAPIC EOI for specific vector with level trigger mode in vIOAPIC, required for supporting PTdev
VMX_EXIT_REASON_EPT_VIOLATION ept_violation_vmexit_handler MMIO emulation, which may have handler in hypervisor (such as vLAPIC or vIOAPIC), or need to create an I/O request to DM
VMX_EXIT_REASON_XSETBV xsetbv_vmexit_handler Set host owned XCR0 for supporting xsave
VMX_EXIT_REASON_APIC_WRITE apic_write_vmexit_handler APIC write for APICv

Details of each vm exit reason handler are described in other sections.

Pending Request Handlers

ACRN uses the function acrn_handle_pending_request to handle requests before VM entry in vcpu_thread.

A bitmap in the vCPU structure lists the different requests:

#define ACRN_REQUEST_EXCP 0U
#define ACRN_REQUEST_EVENT 1U
#define ACRN_REQUEST_EXTINT 2U
#define ACRN_REQUEST_NMI 3U
#define ACRN_REQUEST_TMR_UPDATE 4U
#define ACRN_REQUEST_EPT_FLUSH 5U
#define ACRN_REQUEST_TRP_FAULT 6U
#define ACRN_REQUEST_VPID_FLUSH 7U /* flush vpid tlb */

ACRN provides the function vcpu_make_request to make different requests, set the bitmap of corresponding request, and notify the target vCPU through IPI if necessary (when the target vCPU is not currently running). See section 3.5.5 for details.

void vcpu_make_request(struct vcpu *vcpu, uint16_t eventid)
{
   bitmap_set_lock(eventid, &vcpu->arch_vcpu.pending_req);
   /*
    * if current hostcpu is not the target vcpu's hostcpu, we need
    * to invoke IPI to wake up target vcpu
    *
    * TODO: Here we just compare with cpuid, since cpuid currently is
    *  global under pCPU / vCPU 1:1 mapping. If later we enabled vcpu
    *  scheduling, we need change here to determine it target vcpu is
    *  VMX non-root or root mode
    */
   if (get_cpu_id() != vcpu->pcpu_id) {
           send_single_ipi(vcpu->pcpu_id, VECTOR_NOTIFY_VCPU);
   }
}

For each request, function acrn_handle_pending_request handles each request as shown below.

Request Desc Request Maker Request Handler
ACRN_REQUEST_EXCP Request for exception injection vcpu_inject_gp, vcpu_inject_pf, vcpu_inject_ud, vcpu_inject_ac, or vcpu_inject_ss and then queue corresponding exception by vcpu_queue_exception vcpu_inject_hi_exception, vcpu_inject_lo_exception based on exception priority
ACRN_REQUEST_EVENT Request for vlapic interrupt vector injection vlapic_fire_lvt or vlapic_set_intr, which could be triggered by vlapic lvt, vioapic, or vmsi vcpu_do_pending_event
ACRN_REQUEST_EXTINT Request for extint vector injection vcpu_inject_extint, triggered by vpic vcpu_do_pending_extint
ACRN_REQUEST_NMI Request for nmi injection vcpu_inject_nmi program VMX_ENTRY_INT_INFO_FIELD directly
ACRN_REQUEST_TMR_UPDATE Request for update vIOAPIC TMR, which also leads to vLAPIC VEOI bitmap update for level triggered vector vlapic_reset_tmr or vioapic_indirect_write change trigger mode in RTC vioapic_update_tmr
ACRN_REQUEST_EPT_FLUSH Request for EPT flush ept_mr_add, ept_mr_modify, ept_mr_del, or vmx_write_cr0 disable cache invept
ACRN_REQUEST_TRP_FAULT Request for handling triple fault vcpu_queue_exception meet triple fault fatal error
ACRN_REQUEST_VPID_FLUSH Request for VPID flush None flush_vpid_single

Note

Refer to the interrupt management chapter for request handling order for exception, nmi, and interrupts. For other requests such as tmr update, or EPT flush, there is no mandatory order.

VMX Initialization

ACRN will attempt to initialize the vCPU’s VMCS before its first launch with the host state, execution control, guest state, entry control and exit control, as shown in the table below.

The table briefly shows how each field got configured. The guest state field is critical for a guest CPU start to run based on different CPU modes. One structure boot_ctx is used to pass the necessary initialized guest state to VMX, used only for the BSP of a guest.

For a guest vCPU’s state initialization:

  • If it’s BSP, the guest state configuration is based on boot_ctx, which could be initialized on different objects:
    • SOS BSP based on SBL: booting up context saved at the entry of system boot up
    • UOS BSP: DM context initialization through hypercall
  • If it’s AP, then it will always start from real mode, and the start
    vector will always come from vlapic INIT-SIPI emulation.
struct acrn_vcpu_regs

registers info for vcpu.

Public Members

struct acrn_gp_regs gprs
struct acrn_descriptor_ptr gdt
struct acrn_descriptor_ptr idt
uint64_t rip
uint64_t cs_base
uint64_t cr0
uint64_t cr4
uint64_t cr3
uint64_t ia32_efer
uint64_t rflags
uint64_t reserved_64[4]
uint32_t cs_ar
uint32_t cs_limit
uint32_t reserved_32[3]
uint16_t cs_sel
uint16_t ss_sel
uint16_t ds_sel
uint16_t es_sel
uint16_t fs_sel
uint16_t gs_sel
uint16_t ldt_sel
uint16_t tr_sel
uint16_t reserved_16[4]
VMX Domain Fields Bits Description
host state CS, DS, ES, FS, GS, TR, LDTR, GDTR, IDTR n/a According to host
  MSR_IA32_PAT, MSR_IA32_EFER n/a According to host
  CR0, CR3, CR4 n/a According to host
  RIP n/a Set to vm_exit pointer
  IA32_SYSENTER_CS/ESP/EIP n/a Set to 0
exec control VMX_PIN_VM_EXEC_CONTROLS 0 Enable external-interrupt exiting
    7 Enable posted interrupts
  VMX_PROC_VM_EXEC_CONTROLS 3 Use TSC offsetting
    21 Use TPR shadow
    25 Use I/O bitmaps
    28 Use MSR bitmaps
    31 Activate secondary controls
  VMX_PROC_VM_EXEC_CONTROLS2 0 Virtualize APIC accesses
    1 Enable EPT
    3 Enable RDTSCP
    5 Enable VPID
    7 Unrestricted guest
    8 APIC-register virtualization
    9 Virtual-interrupt delivery
    20 Enable XSAVES/XRSTORS
guest state CS, DS, ES, FS, GS, TR, LDTR, GDTR, IDTR n/a According to vCPU mode and init_ctx
  RIP, RSP n/a According to vCPU mode and init_ctx
  CR0, CR3, CR4 n/a According to vCPU mode and init_ctx
  GUEST_IA32_SYSENTER_CS/ESP/EIP n/a Set to 0
  GUEST_IA32_PAT n/a Set to PAT_POWER_ON_VALUE
entry control VMX_ENTRY_CONTROLS 2 Load debug controls
    14 Load IA32_PAT
    15 Load IA23_EFER
exit control VMX_EXIT_CONTROLS 2 Save debug controls
    9 Host address space size
    15 Acknowledge Interrupt on exit
    18 Save IA32_PAT
    19 Load IA32_PAT
    20 Save IA32_EFER
    21 Load IA32_EFER

CPUID Virtualization

CPUID access from guest would cause VM exits unconditionally if executed as a VMX non-root operation. ACRN must return the emulated processor identification and feature information in the EAX, EBX, ECX, and EDX registers.

To simplify, ACRN returns the same values from the physical CPU for most of the CPUID, and specially handle a few CPUID features which are APIC ID related such as CPUID.01H.

ACRN emulates some extra CPUID features for the hypervisor as well.

There is a per-vm vcpuid_entries array, initialized during VM creation and used to cache most of the CPUID entries for each VM. During guest CPUID emulation, ACRN will read the cached value from this array, except some APIC ID-related CPUID data emulated at runtime.

This table describes details for CPUID emulation:

CPUID Emulation Description
01H
  • Get original value from physical CPUID
  • Fill APIC ID from vLAPIC
  • Disable x2APIC
  • Disable PCID
  • Disable VMX
  • Disable XSAVE if host not enabled
0BH
  • Fill according to X2APIC feature support (default is disabled)
  • If not supported, fill all registers with 0
  • If supported, get from physical CPUID
0DH
  • Fill according to XSAVE feature support
  • If not supported, fill all registers with 0
  • If supported, get from physical CPUID
07H
  • Get from per-vm CPUID entries cache
  • For subleaf 0, disabled INVPCID, Intel RDT
16H
  • Get from per-vm CPUID entries cache
  • If physical CPU support CPUID.16H, read from physical CPUID
  • If physical CPU does not support it, emulate with tsc freq
40000000H
  • Get from per-vm CPUID entries cache
  • EAX: the maximum input value for CPUID supported by ACRN (40000010)
  • EBX, ECX, EDX: hypervisor vendor ID signature - “ACRNACRNACRN”
40000010H
  • Get from per-vm CPUID entries cache
  • EAX: virtual TSC frequency in KHz
  • EBX, ECX, EDX: reserved to 0
0AH
  • PMU Currently disabled
0FH, 10H
  • Intel RDT Currently disabled
12H
  • Intel SGX Currently disabled
14H
  • Intel Processor Trace Currently disabled
Others
  • Get from per-vm CPUID entries cache

Note

ACRN needs to take care of some CPUID values that can change at runtime, for example, XD feature in CPUID.80000001H may be cleared by MISC_ENABLE MSR.

MSR Virtualization

ACRN always enables MSR bitmap in VMX_PROC_VM_EXEC_CONTROLS VMX execution control field. This bitmap marks the MSRs to cause a VM exit upon guest access for both read and write. The VM exit reason for reading or writing these MSRs is respectively VMX_EXIT_REASON_RDMSR or VMX_EXIT_REASON_WRMSR and the vm exit handler is rdmsr_vmexit_handler or wrmsr_vmexit_handler.

This table shows the predefined MSRs ACRN will trap for all the guests. For the MSRs whose bitmap are not set in the MSR bitmap, guest access will be pass-through directly:

MSR Description Handler
MSR_IA32_TSC_DEADLINE TSC target of local APIC’s TSC deadline mode emulates with vlapic
MSR_IA32_BIOS_UPDT_TRIG BIOS update trigger work for update microcode from SOS, the signature ID read is from physical MSR, and a BIOS update trigger from SOS will trigger a physical microcode update.
MSR_IA32_BIOS_SIGN_ID BIOS update signature ID “
MSR_IA32_TIME_STAMP_COUNTER TIme-stamp counter work with VMX_TSC_OFFSET_FULL to emulate virtual TSC
MSR_IA32_PAT Page-attribute table save/restore in vCPU, write to VMX_GUEST_IA32_PAT_FULL if cr0.cd is 0
MSR_IA32_PERF_CTL Performance control Trigger real p-state change if p-state is valid when writing, fetch physical MSR when reading
MSR_IA32_MTRR_CAP Memory type range register related Handled by MTRR emulation.
MSR_IA32_MTRR_DEF_TYPE “ “
MSR_IA32_MTRR_PHYSBASE_0~9 “ “
MSR_IA32_MTRR_FIX64K_00000 “ “
MSR_IA32_MTRR_FIX16K_80000/A0000 “ “
MSR_IA32_MTRR_FIX4K_C0000~F8000 “ “
MSR_IA32_VMX_BASIC~VMX_TRUE_ENTRY_CTLS VMX related MSRs not support, access will inject #GP

CR Virtualization

ACRN emulates mov to cr0, mov to cr4, mov to cr8, and mov from cr8 through cr_access_vmexit_handler based on VMX_EXIT_REASON_CR_ACCESS.

Note

Currently mov to cr8 and mov from cr8 are actually not valid as CR8-load/store exiting bits are set as 0 in VMX_PROC_VM_EXEC_CONTROLS.

A VM can mov from cr0 and mov from cr4 without triggering a VM exit. The value read are the read shadows of the corresponding register in VMCS. The shadows are updated by the hypervisor on CR writes.

Operation Handler
mov to cr0 Based on vCPU set context API: vcpu_set_cr0 -> vmx_write_cr0
mov to cr4 Based on vCPU set context API: vcpu_set_cr4 ->vmx_write_cr4
mov to cr8 Based on vlapic tpr API: vlapic_set_cr8->vlapic_set_tpr
mov from cr8 Based on vlapic tpr API: vlapic_get_cr8->vlapic_get_tpr

For mov to cr0 and mov to cr4, ACRN sets cr0_host_mask/cr4_host_mask into VMX_CR0_MASK/VMX_CR4_MASK for the bitmask causing vm exit.

As ACRN always enables unrestricted guest in VMX_PROC_VM_EXEC_CONTROLS2, CR0.PE and CR0.PG can be controlled by guest.

CR0 MASK Value Comments
cr0_always_on_mask fixed0 & (~(CR0_PE | CR0_PG)) where fixed0 is gotten from MSR_IA32_VMX_CR0_FIXED0, means these bits are fixed to be 1 under VMX operation
cr0_always_off_mask ~fixed1 where ~fixed1 is gotten from MSR_IA32_VMX_CR0_FIXED1, means these bits are fixed to be 0 under VMX operation
CR0_TRAP_MASK CR0_PE | CR0_PG | CR0_WP | CR0_CD | CR0_NW ACRN will also trap PE, PG, WP, CD, and NW bits
cr0_host_mask ~(fixed0 ^ fixed1) | CR0_TRAP_MASK ACRN will finally trap bits under VMX root mode control plus additionally added bits

For mov to cr0 emulation, ACRN will handle a paging mode change based on PG bit change, and a cache mode change based on CD and NW bits changes. ACRN also takes care of illegal writing from guest to invalid CR0 bits (for example, set PG while CR4.PAE = 0 and IA32_EFER.LME = 1), which will finally inject a #GP to guest. Finally, VMX_CR0_READ_SHADOW will be updated for guest reading of host controlled bits, and VMX_GUEST_CR0 will be updated for real vmx cr0 setting.

CR4 MASK Value Comments
cr4_always_on_mask fixed0 where fixed0 is gotten from MSR_IA32_VMX_CR4_FIXED0, means these bits are fixed to be 1 under VMX operation
cr4_always_off_mask ~fixed1 where ~fixed1 is gotten from MSR_IA32_VMX_CR4_FIXED1, means these bits are fixed to be 0 under VMX operation
CR4_TRAP_MASK CR4_PSE | CR4_PAE | CR4_VMXE | CR4_PCIDE ACRN will also trap PSE, PAE, VMXE, and PCIDE bits
cr4_host_mask ~(fixed0 ^ fixed1) | CR4_TRAP_MASK ACRN will finally trap bits under VMX root mode control plus additionally added bits

The mov to cr4 emulation is similar to cr0 emulation noted above.

IO/MMIO Emulation

ACRN always enables I/O bitmap in VMX_PROC_VM_EXEC_CONTROLS and EPT in VMX_PROC_VM_EXEC_CONTROLS2. Based on them, pio_instr_vmexit_handler and ept_violation_vmexit_handler are used for IO/MMIO emulation for a emulated device. The emulated device could locate in hypervisor or DM in SOS. Please refer to the “I/O Emulation” section for more details.

For an emulated device done in the hypervisor, ACRN provide some basic APIs to register its IO/MMIO range:

  • For SOS, the default I/O bitmap are all set to 0, which means SOS will pass through all I/O port access by default. Adding an I/O handler for a hypervisor emulated device needs to first set its corresponding I/O bitmap to 1.
  • For UOS, the default I/O bitmap are all set to 1, which means UOS will trap all I/O port access by default. Adding an I/O handler for a hypervisor emulated device does not need change its I/O bitmap. If the trapped I/O port access does not fall into a hypervisor emulated device, it will create an I/O request and pass it to SOS DM.
  • For SOS, EPT maps all range of memory to the SOS except for ACRN hypervisor area. This means SOS will pass through all MMIO access by default. Adding a MMIO handler for a hypervisor emulated device needs to first remove its MMIO range from EPT mapping.
  • For UOS, EPT only maps its system RAM to the UOS, which means UOS will trap all MMIO access by default. Adding a MMIO handler for a hypervisor emulated device does not need to change its EPT mapping. If the trapped MMIO access does not fall into a hypervisor emulated device, it will create an I/O request and pass it to SOS DM.
API Description
register_pio_emulation_handler register an I/O emulation handler for a hypervisor emulated device by specific I/O range
free_io_emulation_resource free all I/O emulation resources for a VM
register_mmio_emulation_handler register a MMIO emulation handler for a hypervisor emulated device by specific MMIO range
unregister_mmio_emulation_handler unregister a MMIO emulation handler for a hypervisor emulated device by specific MMIO range

Instruction Emulation

ACRN implements a simple instruction emulation infrastructure for MMIO (EPT) and APIC access emulation. When such a VM exit is triggered, the hypervisor needs to decode the instruction from RIP then attempt the corresponding emulation based on its instruction and read/write direction.

ACRN currently supports emulating instructions for mov, movx, movs, stos, test, and, or, cmp, sub and bittest without support for lock prefix. Real mode emulation is not supported.

../../_images/hld-image82.png

Figure 51 Instruction Emulation Work Flow

In the handlers for EPT violation or APIC access VM exit, ACRN will:

  1. Fetch the MMIO access request’s address and size
  2. Do decode_instruction for the instruction in current RIP with the following check:
    1. Is the instruction supported? If not, inject #UD to guest.
    2. Is GVA of RIP, dest, and src valid? If not, inject #PF to guest.
    3. Is stack valid? If not, inject #SS to guest.
  3. If step 2 succeeds, check the access direction. If it’s a write, then do emulate_instruction to fetch MMIO request’s value from instruction operands.
  4. Execute MMIO request handler, for EPT violation is emulate_io while APIC access is vlapic_write/read based on access direction. It will finally complete this MMIO request emulation by:
    1. putting req.val to req.addr for write operation
    2. getting req.val from req.addr for read operation
  5. If the access direction is read, then do emulate_instruction to put MMIO request’s value into instruction operands.
  6. Return to guest.

TSC Emulation

Guest vCPU execution of RDTSC/RDTSCP and access to MSR_IA32_TSC_AUX does not cause a VM Exit to the hypervisor. Hypervisor uses MSR_IA32_TSC_AUX to record CPU ID, thus the CPU ID provided by MSR_IA32_TSC_AUX might be changed via Guest.

RDTSCP is widely used by hypervisor to identify current CPU ID. Due to no VM Exit for MSR_IA32_TSC_AUX MSR register, ACRN hypervisor saves/restores MSR_IA32_TSC_AUX value on every VM Exit/Enter. Before hypervisor restores host CPU ID, rdtscp should not be called as it could get vCPU ID instead of host CPU ID.

The MSR_IA32_TIME_STAMP_COUNTER is emulated by ACRN hypervisor, with a simple implementation based on TSC_OFFSET (enabled in VMX_PROC_VM_EXEC_CONTROLS):

  • For read: val = rdtsc() + exec_vmread64(VMX_TSC_OFFSET_FULL)
  • For write: exec_vmwrite64(VMX_TSC_OFFSET_FULL, val - rdtsc())

XSAVE Emulation

The XSAVE feature set is comprised of eight instructions:

  • XGETBV and XSETBV allow software to read and write the extended control register XCR0, which controls the operation of the XSAVE feature set.
  • XSAVE, XSAVEOPT, XSAVEC, and XSAVES are four instructions that save processor state to memory.
  • XRSTOR and XRSTORS are corresponding instructions that load processor state from memory.
  • XGETBV, XSAVE, XSAVEOPT, XSAVEC, and XRSTOR can be executed at any privilege level;
  • XSETBV, XSAVES, and XRSTORS can be executed only if CPL = 0.

Enabling the XSAVE feature set is controlled by XCR0 (through XSETBV) and IA32_XSS MSR. Refer to the Intel SDM Volume 1 chapter 13 for more details.

../../_images/hld-image38.png

Figure 52 ACRN Hypervisor XSAVE emulation

By default, ACRN enables XSAVES/XRSTORS in VMX_PROC_VM_EXEC_CONTROLS2, so it allows the guest to use the XSAVE feature. Because guest execution of XSETBV will always trigger XSETBV VM exit, ACRN actually needs to take care of XCR0 access.

ACRN emulates XSAVE features through the following rules:

  1. Enumerate CPUID.01H for native XSAVE feature support
  2. If yes for step 1, enable XSAVE in hypervisor by CR4.OSXSAVE
  3. Emulates XSAVE related CPUID.01H & CPUID.0DH to guest
  4. Emulates XCR0 access through xsetbv_vmexit_handler
  5. ACRN pass-through the access of IA32_XSS MSR to guest
  6. ACRN hypervisor does NOT use any feature of XSAVE
  7. As ACRN emulate vCPU with partition mode, so based on above rules 5 and 6, a guest vCPU will fully control the XSAVE feature in non-root mode.