Building UOS from Clear Linux OS¶

This document builds on the Getting Started Guides, and explains how to build UOS from Clear Linux OS.

Build UOS image in Clear Linux OS¶

Follow these steps to build a UOS image from Clear Linux OS:

In Clear Linux OS, install ister (a template-based installer for Linux) included in the Clear Linux OS bundle os-installer. For more information about ister, please visit https://github.com/bryteise/ister.
```
$ sudo swupd bundle-add os-installer
```

After installation is complete, use ister.py to generate the image for UOS with the configuration in uos-image.json:

$ cd ~
$ sudo ister.py -t uos-image.json

An example of the configuration file uos-image.json:

{
    "DestinationType" : "virtual",
    "PartitionLayout" : [ { "disk" : "uos.img",
                            "partition" : 1,
                            "size" : "512M",
                            "type" : "EFI" },
                          { "disk" : "uos.img",
                            "partition" : 2,
                            "size" : "1G",
                            "type" : "swap" },
                          { "disk" : "uos.img",
                            "partition" : 3,
                            "size" : "8G",
                            "type" : "linux" } ],
    "FilesystemTypes" : [ { "disk" : "uos.img",
                            "partition" : 1,
                            "type" : "vfat" },
                          { "disk" : "uos.img",
                            "partition" : 2,
                            "type" : "swap" },
                          { "disk" : "uos.img",
                            "partition" : 3,
                            "type" : "ext4" } ],
    "PartitionMountPoints" : [ { "disk" : "uos.img",
                                 "partition" : 1,
                                 "mount" : "/boot" },
                               { "disk" : "uos.img",
                                 "partition" : 3,
                                 "mount" : "/" } ],
    "Version": "latest",
    "Bundles": ["bootloader",
                "editors",
                "kernel-iot-lts2018",
                "network-basic",
                "os-core-update",
                "os-core",
                "openssh-server",
                "sysadmin-basic"]
 }

Note

To generate the image with a specified version, please modify the "Version" argument, and we can set "Version": 26550 instead of "Version": "latest" for example.

Here we will use "Version": 26550 for example, and the UOS image called uos.img will be generated after successful installation. An example output log is:

Reading configuration
Validating configuration
Creating virtual disk
Creating partitions
Mapping loop device
Creating file systems
Setting up mount points
Starting swupd. May take several minutes
Installing 9 bundles (and dependencies)...
Verifying version 26550
Downloading packs...

Extracting emacs pack for version 26550

Extracting vim pack for version 26550
...
Cleaning up
Successful installation

On your target device, boot the system and select “The ACRN Service OS”, as shown below:

=> The ACRN Service OS
Clear Linux OS for Intel Architecture (Clear-linux-iot-lts2018-4.19.0-19)
Clear Linux OS for Intel Architecture (Clear-linux-iot-lts2018-sos-4.19.0-19)
Clear Linux OS for Intel Architecture (Clear-linux-native.4.19.1-654)
EFI Default Loader
Reboot Into Firmware Interface

Start the User OS (UOS)¶

Mount the UOS image and check the UOS kernel:

# losetup -r -f -P --show ~/uos.img
# mount /dev/loop0p3 /mnt

# ls -l /mnt/usr/lib/kernel/

cmdline-4.19.0-26.iot-lts2018
config-4.19.0-26.iot-lts2018
default-iot-lts2018 -> org.clearlinux.iot-lts2018.4.19.0-26
install.d
org.clearlinux.iot-lts2018.4.19.0-26

Adjust the /usr/share/acrn/samples/nuc/launch_uos.sh script to match your installation. These are the couple of lines you need to modify:
```
-s 3,virtio-blk,~/uos.img \
-k /mnt/usr/lib/kernel/default-iot-lts2018  \
```
Note

UOS image uos.img is in the directory ~/ and UOS kernel default-iot-lts2018 is in /mnt/usr/lib/kernel/.
You are now all set to start the User OS (UOS):
```
$ sudo /usr/share/acrn/samples/nuc/launch_uos.sh
```
You are now watching the User OS booting up!